Bartscher Aurora 22 Manual page 18

7. Coffee will begin to brew. After a moment hot coffee will pour our into the thermo
jug (6).
8. When the brewing process finishes, the machine automatically turns itself off and
the green control light (8) goes out and an audio signal is heard. The coffee is
ready to be served.
9. Remove the thermo jug (6) from the lower
plate (5), replace the pump's tube and close
the cover.
HOT STEAM!
Risk of scalding with steam!
During the brewing process a small amount
of hot steam is produced. Carefully remove
the thermo jug s from the lower plate to
avoid burns!
10. To pour coffee from the thermo jug (6), raise
the arm on the cover up until it catches, then
depress (diagram at right). In this way the
pumping mechanism is activated. Hold the
arm down until the desired amount of coffee
has been poured.
- 35 -