Bartscher Aurora 22 Manual page 17

Hide thumbs Also See for Aurora 22:
Table of Contents

Advertisement

The unit's casing should be wiped with a moist cloth and dried with a soft towel.
Connect the unit to an appropriate power source which serves one piece of
equipment.
The coffee machine is now ready for use.
Preparation of coffee
1. Remove the filter basket with insert (3) and place the proper paper filter
(Code-No.: 190014 or 1900015250) inside.
2. Pour a proper amount of ground coffee into the paper filter. Use 35 to 50 g of coffee
per one litre of water, in accordance with your preferences.
3. Replace the filter basket with insert (3) and slide to the very back until it "clicks"
into place.
5. Open the cover thermo jug (6) and remove the pump's tube. Open the cover at the side
and place the open thermo jug (6) on the lower plate (5) in such a manner that the
thermo jug (6) opening is located below the drip opening on the filter basket (3).
6. Turn the unit on via the main ON/OFF switch (1). The green control light (brewing
indicator) (8) will turn on.
- 34 -
4. Pour the appropriate amount of cold
fresh drinking water into the water
container (4), max. 2.0 litres.
The minimum amount necessary to
pour is 0,5 litres.
CAUTION!
Fill the water container with only
fresh drinking water.
Never pour sugar, coffee, tea or milk
into the opening for water container!

Advertisement

Table of Contents
loading

Table of Contents