Table of Contents
Advertisement
Before you connect the server to the power source, review the following diagram (and the
warning that follows) to ensure that all peripheral hardware devices are in place:
Warning:
Risk of personal injury and risk of hardware failure
You must connect the power outlets that are used by the CallPilot server and its peripheral
devices to the same single-point ground reference as the one used by the switching system
connected to the CallPilot server.
If this requirement is not met, power transients can cause personal injury, hardware failure,
or both. For more information on single-point grounding requirements, refer to the
Installation and Configuration Task List (NN44200-306).
Avaya CallPilot® 703t Server Hardware Installation
Before you begin
December 2010
47
Advertisement
Table of Contents
