Roland CAMM-1 Pro PNC- 1410 Service Notes page 45

If there is an error in "a", select "Carriage" and push the
9
[ENTER] key. If "b", select "Grit".
Enter the error with [
10
key.
Make sure to re-write the amount on the sticker after
11
calibration.
] and [ ] key and push [ENTER]
Select axis
Grit Carriage
ENTER
Grit calibration
0.02% -> 0.02%
Grit calibration
0.02% -> 0.10%
ENTER
Grit calibration
0.10% -> 0.10%
4 Adjustment
Select axis
Grit Carriage
ENTER
Car. calibration
0.06% -> 0.06%
4
Car. calibration
0.06% -> 0.10%
ENTER
Car. calibration
0.10% -> 0.10%
43