Roland CAMM-1 Pro PNC- 1410 Service Notes page 37

Enter the Service Mode by turning on the power while
8
pressing [ ], [ ] and [
[ ], [ ] keys, and push [ENTER] key.
Push the [ENTER] key.
9
- Pen will be in DOWN position.
Adjust VR1 on the MAIN BOARD ASS'Y so that the pressure
10
would be 26 ~ 30 gf when pen tip leaves the BED.
Push the [ENTER] key.
11
- Pen will be in UP position.
] keys. Select "Force" with
Sensor DRAM
EEROM Ageing
Force Key
Calib. Landing
ENTER
Force adjust
[ up ] 20g
Force adjust
[ up ]
Force adjust
[ down ]
ST-012
BED
MAIN BOARD ASS'Y
Force adjust
[ down ]
Force adjust
[ up ]
4 Adjustment
Press the [right] key
four times.
4
20g
ENTER
20g
PEN
CARRIAGE
VR1
20g
ENTER
20g
35