Roland CAMM-1 Pro PNC- 1410 Service Notes page 23

3-2 DRIVE PULLEY ASSEMBLY_FIXING
Fix the CARRIAGE WIRE to the DRIVE PULLEY
1
ASSEMBLY (Page 22).
Fix the DRIVE PULLEY ASSEMBLY to the MOTOR BASE.
Fix the CARRIAGE MOTOR by checking the backlash.
2
Fix the SHAFT STAY temporary to the FRAME R.
3
Tighten the SCREW A for the SHAFT STAY until the
4
PULLEY SHAFT makes contact with the SHAFT STAY.
Tighten the SCREWS B.
DRIVE PULLEY ASSEMBLY
FRAME R
SCREW B
SHAFT STAY
PULLEY SHAFT
3 Replacement of Main Parts
MOTOR BASE
3
SHAFT STAY
SCREW A
21