Spacer Bed Adjustment; Carriage - Roland CAMM-1 Pro PNC- 1410 Service Notes

4 Adjustment

4-5 Spacer Bed Adjustment

This adjustment should be carried out normally.
1
It should be carried out only when the clearance between the
pen tip and the BED won't be 2.4 ~ 3.0 mm at the positions
check at 7 of Tool Height Adjustment. (Page 28)
4
Remove both FRONT and REAR COVERS.
2
Put the WHITE DUMMY PEN (ST-006) to the PEN
3

CARRIAGE.

Put the PINCH ROLLERS DOWN at both left and right ends
4
of the GRIT ROLLER. The MIDDLE PINCH ROLLER for
PNC-1860/1410 should be UP.
Remove both FRONT and REAR APRONS.
30
ST-006
WHITE DUMMY PEN
PINCH ROLLER
GRIT ROLLER
PEN CARRIAGE
MIDDLE PINCH ROLLER
PINCH ROLLER