Roland CAMM-1 Pro PNC- 1410 Service Notes page 26

3 Replacement of Main Parts
3-4 PINCH ROLLER ASSEMBLIES_FIXING
Tapered type is used for left and right PINCH ROLLERS.
1
Be careful when replacing them.
Flat type is used for the MIDDLE PINCH ROLLER one.
3
3-5 CUTTER PROTECTION_FIXING
Leave the equal space at both ends of CUTTER
1
PROTECTION.
Make sure the CUTTER PROTECTION is not bumpy by
2
pushing it with your finger.
24
MIDDLE PINCH ROLLER
CUTTERÅ@PROTECTION
PINCH ROLLER