Table of Contents
Advertisement
9.12
Trigger
The description of trigger type and characteristic, please refer to the chapter "Image acquisition and Camera
Mode".
Trigger Signal Processing Process
External Hardware Trigger or Software Trigger input the camera's internal process as follows.
Switching Trigger can be done through register access or GenICam commands
Switching point 1: Switch to Hardware Trigger and Software Trigger
TriggerSource = Software on GenICam
TriggerSource = Hardware on GenICam
TriggerSource = Line0 on GenICam
STC-SBE132POE / STC-SCE132POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
No.14S002-08
42/53
Advertisement
Table of Contents
