Terminal Settings - TANDBERG DIRECTOR D5016402 User Manual

Multimedia and videoconferencing system

Table of Contents

Advanced Use

Terminal Settings

This menu provides basic network setup for the unit and should be used when installing the

system.

Network Configuration

Before using the system it is necessary to specify which network to use and define its settings.

If you want to use your system via ISDN-BRI you should select 'Current Network: ISDN-BRI' and

enter the 'ISDN-BRI Settings' menu to set the BRI parameters.

If you want to use your system via ISDN-PRI you should select 'Current Network: ISDN-PRI' and

enter the 'ISDN-PRI Settings' menu to set the PRI parameters.

If you want to use your system via Leased E1/T1, you should select 'Current Network: Leased

E1/T1' and enter the 'Leased E1/T1 Settings' menu to set the Leased E1/T1 parameters.

If you want to use special networks and connect using RS449, V.35, X.21 or connect to ISDN via

an external IMUX you should select 'Current Network: External' and enter the 'External Network

Settings' menu to set the External Network parameters.

TANDBERG Director Videoconferencing System

N O T E

OTH

'ISDN-PRI'

PHYSICAL INTERFACE ON THE

CODEC MARKED

E1/T1'

EASED

AND

USES THE SAME

'E1/T1'.

Table of Contents

Director