Table of Contents
Advertisement
TANDBERG Director Videoconferencing System
Device Connections
Microphone
Connect the microphone cable to the XLR input of the 6000 codec. The default codec setting has
all microphone inputs enabled and the gain set to +3dB. Adjustments to the audio settings may be
done in 'T
OUCHSCREEN
Touch Panel
A 12" or 15" color video touch panel options are available for the Director system. Cables
necessary for connecting them to the system are included with the touch panel. See 'B
S
C
YSTEM
ONNECTIONS
P
I
ANEL
NTERFACE
Main Camera
The main camera source selection corresponds to the first s-video input (labeled "1") on the codec.
This camera input used specifically with the controllable TANDBERG W.A.V.E II camera.
AUX Camera
The auxiliary camera source selection corresponds to the second s-video input (labeled "2") on the
codec. This camera input can be a fixed room camera or can be a second controllable TANDBERG
W.A.V.E II camera. To control a second camera, control signaling must be "daisy-chained" from the
first camera. Additionally, the camera must be powered locally and the video must be run
separately back to the codec. Installation instructions for installing this are included with an extra
camera when purchased.
T
' or with the 'IR C
OOLS
' for details on connecting a touch panel. See A
.
' (discussed later in this document).
ONTROLS
N O T E
Installation
ASIC
7: 12" T
PPENDIX
OUCH
I
F CONNECTING TWO CAMERAS
-
THEY MUST BE IDENTICAL
WAVE II
CANNOT HAVE ONE
S
CAMERA AND ONE
ONY CAMERA
T
WAVE II
HEY MUST BOTH BE
VISCA
CAMERAS OR BOTH BE A
CONTROLLABLE CAMERA OF THE
.
SAME MAKE AND MODEL
,
YOU
.
27
Advertisement
Table of Contents
