Table of Contents
Advertisement
TANDBERG Director Videoconferencing System
PC SoftPresenter
PC SoftPresenter is used to display PC images on your system without using a VGA cable (PC
Presenter). The TANDBERG video conferencing system and your PC must be connected to a LAN. In
addition, VNC (Virtual Network Computing) server software must be installed on the PC.
To show the PC image:
•
Start the VNC software on your PC.
•
Press PC on your remote control. Use UP/DOWN to
activate PAGE UP/PAGE DOWN on the PC.
For setup information and details, see 'VNC S
Web-interface
It is possible to access and maintain the system remotely via a local area network (LAN) using a
standard Web-browser.
Connect your system from the LAN socket, found on the codec interface panel, to a local area
network. Then configure your codec:
•
Press
•
Specify IP-assignment 'DHCP' or 'Static'. If DHCP is selected no other settings are needed.
If Static is selected, 'IP-address', 'IP-subnet mask' and 'Gateway' must be specified.
E
XAMPLE
See 'A
DVANCED
•
Start your Web-browser. In the address field type the IP-address of the codec. The Web-page
of the codec will be shown.
Text Chat / Closed Captioning
While in an ISDN or IP call to another system supporting Text Chat (T.140), select 'Text Chat' from
the Web-page of the codec. Enter text in the window displayed. When selecting 'Send Text', the
text will be displayed on the local and far-end monitor as shown below:
The local Text Chat window can be closed
manually from the Web-interface by pressing
'Close Window'. It will also close
automatically after a few minutes without
activity.
Streaming
To view streaming, select 'Streaming' from the Web-
page of the codec. See separate 'Streaming' section
in this manual for further information.
, select 'Terminal Settings' > 'LAN Settings'
MENU
:
IP-
:
ASSIGNMENT
IP-
:
ADDRESS
IP-
:
SUBNET MASK
G
:
ATEWAY
U
' > 'LAN S
SE
ETTINGS
' in 'A
ETTINGS
DVANCED USE
N O T E T
S
TATIC
196.9.200.129
255.255.255.0
196.9.200.21
' for further information.
N O T E S
'PC: VNC'
N O T E
MUST BE SET IN
'V
S
IDEO
ETTINGS
'.
HE SYSTEM MUST BE RESTARTED BEFORE
'LAN S
CHANGES IN THE
ETTINGS
. N
-
TAKE EFFECT
OTICE THE ON
RESTART
QUICK KEY OPTION
TREAMING CAN ONLY BE INITIATED ONLY IF IS
'
'.
ON
General Use
'.
'
MENU CAN
SCREEN
.
41
Advertisement
Table of Contents
