TANDBERG DIRECTOR D5016402 User Manual page 78

Advanced Use
Example:
Below is a list of common service profiles. As these profiles may change, contact your service
provider to get the correct profile.
Service profiles for AT&T:
NSF Service
Disable
SDN (including GSDN)
Megacom 800
Megacom
Accunet
Long Distance
International 800
MultiQuest
Call Redirection Service
Leased E1/T1 Settings
Network Interface
Indicates if the network is of type E1 (30 channels) or T1 (24 channels). E1 will be default for PAL
versions, T1 default for NTSC versions.
Max Channels
Indicates the maximum number of channels the codec is allowed to use on the E1/T1 interface.
When E1 is selected, maximum is 30 channels. When T1 is selected, maximum is 24 channels.
Start Channel
Indicates the first E1/T1 channel the codec is allowed to use. This setting might be used if the E1/
T1 line is shared with other equipment.
T1 Line Coding
Indicates how the signals on the line should be coded. If parts of the line between the systems use
restricted coding, this should be selected,
Line Settings
This is the same menu as for ISDN-PRI. Please refer to section 'ISDN-PRI S
78
Service profiles for Sprint:
NSF Service
0 Reserved
1 Private
2 Inwatts
3 Outwatts
6 FX
7 TieTrunk
8
16
23
TANDBERG Director Videoconferencing System
Service profiles for MCI:
NSF Service
0 VNET/Vision
1 800
2 PRISM1, PRISMII, WATS
3 900
4 DAL
5
A
N O T E LL SETTINGS MUST BE IDENTICAL
ON BOTH SIDES OF THE
E1/T1
CONNECTION
ETTINGS
1
2
3
4
5
L
EASED
.
'.