Videoconferencing Taskbar - TANDBERG DIRECTOR D5016402 User Manual

Display Operation
Touching the main screen will enlarge the image to fill the screen. This function works for the video
sources only and not the PC source. The PC source is configured for annotation, therefore use the
/
ENLARGE REDUCE
Touching the video display again will return it to the previous size.

Videoconferencing Taskbar

The gray
TASKBAR
videoconference operation. The text on the button can change depending on the display status.
The button border and text will illuminate red when it is activated.
H / T
IDE ASKBAR
C C
ALL ONTROL
V
OLUME
M M
IC UTE
PIP
E / R
NLARGE
V
IEW
M
ULTIPOINT
D V TF
UO IDEO
50
button in this case.
present at the bottom of the screen provides controls relevant to the
H removes the taskbar from the screen, a single Taskbar button replaces it.
IDE
T displays the taskbar on the bottom of the screen
ASKBAR
Returns to Call Control screen to disconnect current call or add a MultiSite
Increases or decreases the local volume level within the room by using the arrow
buttons. The level bar indicates the current level setting.
Disables sound from all microphones within the room. While the mute is active the
button border and text is blinking red and an on screen, mic off icon appears. De-
activate by pressing Mic Mute again.
This inserts, moves and removes the picture in picture image on the remote site
screen.
E increases the size of the video display to full screen, thus covering the source
EDUCE NLARGE
selection and device controls. The taskbar will remain available.
R returns the video display to the standard size allowing access to the source
EDUCE
selection and device control.
It is also possible to enlarge and reduce the video display by touching the video
window itself. This function works for the video sources only and not the PC source.
This changes the screen view from the default main screen and smaller confidence
screen to the more traditional dual screen view.
Default
Gives the user access to Multipoint control screen.
When DuoVideo
TF
DuoVideo connection and take the user to the DuoVideo
TF
D V O
UO IDEO PERATION
Dual
TF
is possible this button will be displayed. Selecting this will initiate the
.
TANDBERG Videoconferencing System
TF
control screen. See
TF
Call.