Videoconference Operation - TANDBERG DIRECTOR D5016402 User Manual

TANDBERG Videoconferencing System

Videoconference Operation

When the Director receives/initiates a video/audio call.
When an incoming call connects the user will be automatically taken
to the Videoconference Main Screen, otherwise on the
select the
VIDEOCONFERENCE
Screen.
Display Screens
The LEFT screen will
be the
REMOTE SITE
The RIGHT screen is
the local display of the
currently selected
VIDEO SOURCE
Address Book
Speed dials and call
Making Calls
From the Call Control screen there are two methods that you can use to make a call:
and
DIALING
Speed Dialing
To call a previously set speed dial number:
1. In the
ADDRESS BOOK
bar. You can use the
2. If this is the site you wish to call press the green
as defined.
3. If the remote site is not answering select the red
4. When the call is established the Videoconference Main Screen will be displayed.
button to access the Call Control
.
controls
Taskbar
.
MANUAL DIALING
select a speed dial site; its call details will be displayed in the white text
/
UP DOWN ARROWS
TASKBAR
to scroll or page through all the available speed dials.
button. The call will be established
CONNECT
button to disconnect the call.
HANG UP
Display Operation
1 2 3 4 5 6 7 8 9 0 Remote Video 1 2 3 4 5 6 7 8 9 0 You Are Sending
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
SPEED
45