Making Connections; Removing The Connector Cover; Connecting Input Devices - Barco Cine VERSUM 60 Owner's Manual

3. MAKING CONNECTIONS

Overview
•

Removing the connector cover

•

Connecting input devices

•
Replacing the connector cover
3.1 Removing the Connector Cover
Before you can connect the power cord and input devices to the projector, the connector cover must me removed.
How to remove the connector cover
1 Loosen the captive screw (image 3-1).
2 Lift up at the bottom firmly and "snap" the cover loose (image 3-2).
The cover makes a loud "snap" when removed: this is normal and does not damage the cover.
Image 3-1
Connector cover unlock
3.2 Connecting Input Devices
Various video devices and a PC or notebook computer can be connected to the projector at the same time. Video devices include
DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras. Check the user manual of the connecting device
to confirm it has the appropriate output connector.
Component versus composite video
In component video the term component describes a number of elements that are needed to make up the
video picture; these components are PR/Y/PB. A composite video signal on the other hand contains all
the information needed for the color picture in a single channel of information.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
R5976691 CINE VERSUM 70/60 24112003
MAKING CONNECTIONS
Image 3-2
Connector cover removal
9