Overview Of User's Controls; Projector; Remote Control - Barco Cine VERSUM 60 Owner's Manual

2. OVERVIEW OF USER'S CONTROLS

Overview
•

Projector

•

Remote Control

•
Remote Control Operation
2.1 Projector
Top View
The top side of the projector is provided with the following controls:
Image 2-1
Projector controls
Controls function description
Ref. Function
1 Infrared receiver
2 Infrared reception LED indicator
3 Standby LED
4 Main power switch
Table 2-1
2.2 Remote Control
Top side
The Infrared remote control buttons support the following functionality:
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
Buttons that are not labeled in the following remote control illustration have no function.
R5976691 CINE VERSUM 70/60 24112003
OVERVIEW OF USER'S CONTROLS
Description
Infrared reception diode for the IR signals from the IR transmitter. Allows
switching On/Off (Standby) of the projector.
Lights up when a valid IR signal from the remote control has been captured.
Lights up continuously: projector in operation mode.
Lights up repeatedly 2 times short, 1 time long, off: projector in standby
mode.
Blinks fast: projector in cooling down mode after switching off (duration 1
min.).
Lights up repeatedly 1 time long, 1 time short, off: projector has been started
up in cooling down mode, waiting for lamp ignition.
Button pressed, switches the projector in 'standby' mode. This mode is
indicated by the standby LED which lights up repeatedly 2 times short, 1
time long, off.
5