Table of Contents
Advertisement
Installing a SODIMM
The system supports two DDR4 SODIMM socket. To install a memory mod-
ule, grasp the memory module by its edges and align the module's notch
with the socket's notch; then insert the memory into the socket at an
angle and push it down until you feel a click.
Notes:
1.
The system supports dual-channel configuration. To enable dual-channel,
populate both SODIMM sockets.
2.
If installing only one memory module, please install it on the memory socket
labeled DIMM 1 (the one closer to the edge of the board).
3.
The SODIMM sockets can only accept DDR4 memory modules. Please do not
install other types of memory modules.
Insert the memory
at an angle
SODIMM module
installed into the socket
6
Advertisement
Table of Contents
