PCM-3111 (to be used with PCM-3110)
The PCM-3111 model consists of a PC/104 (16-bit) interface module
with one built-in PCMCIA card slot. It can be stacked with the PCM-
3110, with connections being maintained with the 104-pin bus connec-
tor. It can also be mounted on a custom carrier board to form a sepa-
rate stand-alone unit. The PCMCIA slot is built into the interface card.
The PCMCIA slot on the PCM-3111 provides full support for all Type
I, Type II and Type III PCMCIA memory, I/O and ATA hard disk cards.
PCM-3111 Specifications
•
Complies with PCMCIA v. 2.10 and JEIDA v.4.1
•
Accepts Type I/II/III PCMCIA cards
•
16-bit data bus
•
80-pin mini connector connects to PCM-3110
•
Single +5 V (@ 70 mA) power supply
•
Supports all the functions of the PCM-3110
1-4
PC/104 PCMCIA MODULE