Hardware Installation; Introduction; System Requirements (All Models) - Advantech PCM-3110 Manual

Chapter 2.

HARDWARE INSTALLATION

Introduction

As we have mentioned, there are six models in the PC/104 PCMCIA
Module series: PCM-3110, PCM-3111, PCM-3115B, PCM-3110B,
PCM-3113 and PCM-3114. The components and hardware installation
procedures are different for all the models, and separate instructions are
provided in this chapter.
Please check to see which model you have purchased before reading
these instructions. Read only the instructions referring to the model you
have purchased and ignore the other instructions.

System Requirements (All models)

Please note that all models in the PC/104 PCMCIA Module series
require a system conforming to the following specifications:
• IBM PC/AT, including all 80286, 80386, 80486, Pentium and
Pentium Pro processor-based computers
• Hard disk drive
• MS-DOS 5.0 or above, Windows 3.1, Windows 95 or Windows
NT
• One PC/104 connector
• One empty 3.5" floppy disk drive bay (PCM-3113 and PCM-3114
only)
HARDWARE INSTALLATION 2-1