Implementation Of The Pcm-3524; Standalone; Plugged Into Single Board Computer - Advantech PCM-3524 User Manual

2.5 Implementation of the PCM-3524

There are two basic ways to implement the PCM-3524 into your system:

2.5.1 Standalone

The user may adapt an AC-to-DC power supply, plug it into PCM-3524's
CN6 or J2, and connect the VGA input to CN3 or CN4 to convert the
VGA RGB signal into a TV signal.

2.5.2 Plugged into Single Board Computer

The user can plug PCM-3524 into the PC/104 connector on the related
SBC for the power supply, and connect the VGA input to CN3 or CN4 to
convert the VGA RGB signal into a TV signal.
Note:
When attaching to a PC/104 connector,
please make sure that you orient the
PCM-3524 to the host board correctly.
Don't attach it 180 degrees off!
13 Chapter 2 Installation