Jumpers And Connectors - Supermicro C7Z270-CG Quick Reference Manual

P c
ackage ontents
• One (1) Supermicro Motherboard
• Four (4) SATA Cables, One (1) I/O Shield
• One (1) Quick Reference, One (1) Driver CD

Jumpers and Connectors

Jumper
CLEAR CMOS Clear CMOS Switch
JBR1 BIOS Recovery Switch
JBT1 Clear CMOS (on board)
JI C1/JI C2 SMB to PCI Slots
2 2
JPAC1 Audio Enable
JPL1 LAN1 Enable/Disable
JPME2
Intel
JWD1 Watch Dog Function Enable
POWER BUTTON Internal Power Button
RESET BUTTON Onboard System Reset Button
Connector
AUDIO FP
B1
COM1
I-SATA0~5
JD1
JF1
JL1
JLED1
JPW1
JPW2
JSD1
JSPDIF_OUT
JSTBY1
JTPM1
PCI-E M.2 CONNECTOR 1, 2*
U.2 CONNECTOR 1, 2*
USB 2/3, USB 4/5, USB 6/7
USB 12/13 (3.0)
SYS FAN 1,2,3 CPU FAN 1,2
*
PCIE M.2 Connector 1 shares with U.2 Connector 1. (When M.2 device is plugged into PCIE M.2 Connector 1, U.1 connector 1 will be automatically disabled.)
*
PCIE M.2 Connector 2 shares with SATA4/5. (When M.2 device is plugged into PCIE M.2 Connector 2, SATA4/5 will be automatically disabled.)
Jumpers
Description
®
Manufacturing Mode
Connectors
Front Panel Audio Header
Onboard Battery
COM1 Port Header
(Intel ® Z270) Serial ATA (SATA 3.0) Ports 0~5 (6Gb/sec)
Speaker/buzzer (Pins 1~4: External Speaker, Pins 3~4: Buzzer)
Front Panel Control Header
Chassis Intrusion Header
Power LED Indicator Header
24-pin ATX Main Power Connector (Required)
+12V 8-pin CPU power Connector (Required)
SATA DOM (Disk On Module) Power Connector
Sony/Philips Digital Interface Format (S/PDIF) Out Header
Standby Power Header
Trusted Platform Module (TPM) Header
PCI-E M.2 Connectors 1 and 2, small form factor devices and other portable
devices for High speed NVMe SSDs
U.2 Connector 1 and 2, for 2.5" SSD Drives
Front Panel Accessible USB 2.0 Headers 2/3, 4/5. 6/7
Front Panel Accessible USB 3.0 Header 12/13
System/CPU Fan Headers
Default
Push Button Switch
Pins 1-2 (Disable)
Short pads to clear CMOS
On (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (RST)
Push Button Switch
Push Button Switch
Description