Replacing The Starter Rope - Fayat BOMAG BT 60/4 Operating And Maintenance Instructions Manual

Maintenance every year

6.16 Replacing the starter rope

Fig. 62
Caution
!
Do not mix up the recoil starter fastening
screws by mistake!
Unscrew the fastening screws (1), (4) and (6)
l
(Fig. 62) and take off the recoil starter.
Fig. 63
Pull the starter rope with the starter handle out
l
completely (Fig. 63).
52
5
Fig. 64
If the starter rope has been torn or the coil has re-
coiled completely:
Before assembling the rope turn the coil (2)
l
(Fig. 64) 5 revolutions in anti-clockwise direc-
tion and align the rope openings in coil and
housing (5) to each other (A).
20 mm
0.8 in
Fig. 65
Secure the coil (2) (Fig. 65) against winding
l
up. For this purpose fix coil and housing /5)
with a cable strap (1).
Loosen the knots at both ends of the starter
l
rope and remove the old starter rope.
Thread in the new starter rope (3) and fix it with
l
knots on both ends.
BOMAG
A
2
540251
20 mm
0.8 in
540250
BT 60/4, BT 65/4