Fayat BOMAG BT 60/4 Operating And Maintenance Instructions Manual page 48

Fig. 55
Clean the area around the tank cover, un-
l
screw the tank cover (1) (Fig. 55).
Unscrew 3 fastening screw from the cover (2)
l
and take off the cover.
Unscrew 3 fastening screws for the engine
l
stop switch and take off the engine stop
switch.
Fig. 56
Unscrew the fuel valve (Fig. 56).
l
Clean the screen grid.
l
Check the condition of the screen grid (holes),
l
replace the fuel cock if necessary.
Screw the fuel cock back in with a new seal.
l
Install the engine stop switch again. Retighten
l
the fastening screws with a tightening torque
of 10 Nm (7.4 ft.lbs).
Reassemble the cover. Retighten the fasten-
l
ing screws with a tightening torque of 3 Nm
(2.2 ft.lbs).
Fasten the fuel hose to the fuel valve.
l
BT 60/4, BT 65/4
Close the tank again.
l
1
2
3
541089
BOMAG
Maintenance every year
49