Fayat BOMAG BT 60/4 Operating And Maintenance Instructions Manual page 29

Fig. 21
To achieve uniform running you should actu-
l
ate the throttle lever within range "I" (3600 bis
-1
4200 min ) (Fig. 21), depending on condition
and density of soil.
Fig. 22
The forward moving speed can be influenced
l
by applying weight on the steering bow.
No load = slowly forward (Fig. 22)
BT 60/4, BT 65/4
Fig. 23
Strong pres-
sure
i
Note
The layer thickness of the material to be compact-
ed should not be higher that is possible for the vi-
bratory tamper to cope with.
Should the tamper get out of its vibrating rhythm
on excessively compacted soil, harmonic running
of the tamper can be achieved again by slightly al-
tering the steep and/or inclination of the tamper.
540241
Fig. 24
Always shift the throttle lever to position "MIN"
l
for short work breaks (Fig. 24).
i
Note
This prevents premature wear of the centrifugal
clutch and enhances the fuel economy.
BOMAG
Operation
= fast forward (Fig. 23)
540242
29