System Operation; Battery Charge Indicator; Establishing A Smartphone Connection; Connecting The Mini Remote To The System Controller - Bosch PIVOT SHUTTLE AM Operational Instructions

Table of Contents

Advertisement

Battery Charge Indicator

The top LED on the System Controller flashes to indicate that the battery is being charged
when the charger is connected to the charging port.
The state of charge of the battery can also be checked on the LEDs of the battery itself.
On the display, each ice-blue bar represents 20% capacity and each white bar represents
10% capacity. The top bar shows the maximum capacity. Example: Four ice-blue bars and
one white bar are displayed. The state of charge is between 81% and 90%.
If the capacity is low, both the lower bars change color. When the bottom two LEDs are
orange there is 30-21%.
If the bottom LED is the only one illuminated orange, the capacity is 20-11%.
If the bottom LED is red, the capacity is 10% to reserve. And when flashing red it is between reserve and empty.

Establishing a Smartphone Connection

In order to use some of the eBike functions, a smartphone with the eBike Flow app is required.
Download the Bosch eBike Flow app to your smartphone from the app store and follow the
instructions on the app.

Connecting the Mini Remote to the System Controller

The System Controller and Mini Remote operating units are connected via Bluetooth®. If the Mini
Remote operating unit has not already been connected to the System Controller proceed as follows:
When connecting a Mini Remote, go to settings then click on manage bike settings, then click on
components, then click on add new device. Then follow app instructions.

Rim Magnet Speed Sensor

The Shuttle AM features the Rim Magnet instead of a rotor
magnet and wired speed sensor. The drive unit itself detects
when the magnet is close to it and calculates the speed and
any other data required.
The Rim Magnet must be installed on the wheel for the
motor to provide assist.
Since the drive unit is sensitive to magnetic fields, avoid
other magnetic fields in the vicinity of the drive unit (e.g.
magnetic clipless pedals, magnetic cadence sensors, etc.) in
order to prevent disruption to the drive unit.
If you get a flat tire on a ride you will need a tube with at
least a 32mm long valve stem to mount the rim magnet on.
www.pivotcycles.com
info@pivotcycles.com

SYSTEM OPERATION

eBike Flow App
1.877.857.4868
6

Advertisement

Table of Contents
loading

Table of Contents