CD Automation Revo Revex 2PH Series User Manual page 44

REVEX
2PH from 60A to 90A
10.5.8 To reset the power totals:
1) Click Test, if not already on the test view
2) Click Online
3) Click Reset Totals
4) Click Yes
10.5.9 Setting Up and Using Data Logging
To set up data logging:
1) Click Test, if not already on the test view
2) Click Online
3) Click Load Analyzer
4) On the Load Analyzer
5) In the Data Log window ensure the slider is set to
Log Enabled
6) Click Set Time
7) If necessary Set the date and time and close the
date/time window
8) Set Log Time to the number of seconds between
records
9) Click Connect
10) Click
Confi g
11) Click Load Confi guration
12) For up to ten parameters to log:
-Click to add a parameter to the list
+
-In a row in the list either: Type a parameter's Modbus address in the
OR
-Select the parameter from the drop down list in the
13) Click Write Confi guration
14) Click Close
15) Click Disconnect
16) Close the Data Log
view click Data Log
to view the current list of logged parameters
to send the parameter list to the controller
window
Par
Name fi eld
44
User's manual
fi eld