Tecnosicurezza MiniTech User Instructions page 7

MiniTech
• If a wrong code is entered, LCD displays the message:
• To open or access the menu in dual mode (if set), enter the first
code. LCD shows:
Then, enter the second code.
Shortcuts
Press and hold for 2 seconds the button related to the needed function:
= Change Manager code (01), users (02-49) and override users (50-59)
= Users management
= Lock setup (even with Dallas key)
= PIN entering for dynamic codes
= Block/release the lock
= Test mode
= Change language
= Audit and PC link (only in pre-setup mode)
= System info and contrast adjustment
= Time delay and opening window
= Exit and back to the main menu
= Master menu
User properties and default codes
Users can be set for opening with code only, code + Dallas key or with Dallas key only. It is also
possible to set a dual mode opening: in this case, entering the two users codes is required to
open the lock.
Default codes are:
IU_MiniTech_04
User instructions
WRONG CODE
ENTER 2° CODE
X X – X X X X X X
7 di 22