Tecnosicurezza MiniTech User Instructions page 19

MiniTech
Audit
Download the audit on a Dallas key
Events can be downloaded through a Dallas key.
Enter Master menu. Press
Insert the Audit Dallas key into the reader.
Press . LCD shows:
If download is successful, LCD shows:
Events check on LCD
This function allows to check all openings and closings performed on LCD.
Enter Master menu. Press
Press and wait for few seconds. LCD shows:
Press . After few seconds, LCD shows the last opening/closing
event recorded.
Press to scroll all the events or
Change Master code
Enter Master menu. Press
Press and enter the new code.
Enter the new code again to confirm it.
Manager Management
This menu can only be used if previously enabled through the setup
software. Thus, please refer to the user manual
IU_Minitech_setup_XX.
Please contact Tecnosicurezza for further information.
Enter Master menu. Press
Press . LCD shows:
" " installed, "_" deleted, "X" disabled.
IU_MiniTech_04
until the LCD shows:
until the LCD shows:
to exit.
until the LCD shows:
until the LCD shows:
User instructions
SYSTEM AUDIT
ENTER DALLAS
...
DOWNLOADING
10%
OPERATION DONE
SYSTEM AUDIT
➔
PC LINK
SCROLL EVENTS
001: 
WED
28/09 14:42:48
CHANGE MASTER
CODE
ENTER NEW CODE
X X X X X X X X
CONFIRM CODE
X X X X X X X X
MANAGER
MANAGEMENT
✓
MANAGER
19 di 22