Geeetech A10T User Manual page 33

Shenzhen Getech Technology Co.,Ltd
(Picture 8-9)
d. Printer shape dialog (Picture 8-10):
(Picture 8-10)
Now the printer parameters are set.
Note: If the operating system is Mac OS, Repetier Host baud rate is also set to 250,000.

Set slicing parameters
After setting the printer parameters, click "Connect" on the top left corner. The color of the icon
changed to green means the printer connects to the Repetier-Host successfully. Click it again to
disconnect. See picture (8-11).
33