10Function introduction
10.1 Power loss-resuming capability
In the normal printing process, such as accidental power outage, after the power is restarted, the
pop-up prompt option (Power outage), choose "Resume print". See picture (10-1).
When it reaches the target temperature, the X and Y axes will auto home. The extruder will
extrude the residue in the nozzle. Use a tweezers to clean the nozzle before starting printing
again.
Note:
When power outage, move the nozzle away from the printing model in case the filament
oozes out on to the print.
Be sure to clean the residue in the nozzle before restarting the print or it would affect the
quality of the print.
10.2 Reset button
The reset button is below the knob. When the printer works abnormally, press the reset button
to reset the printer to avoid any damage. See picture (10-2).
Shenzhen Getech Technology Co.,Ltd
(Picture 10-1)
(Picture 10-2)
49