Table of Contents
Advertisement
1
Attention
1.1Safety instructions
Please switch to the correct local voltage (110V-220V) before turning on the printer. Be sure
the switch is in the correct position or it will damage the power supply unit (PSU).
Be sure all wires are correctly connected before turning on the printer.
Don't touch the extruder head or hot bed when printing as they generate high temperature
which may cause burn.
Don't leave the printer unattended when printing.
1.2Factory test before delivery
In order to ensure the quality, each printer is tested in the factory before delivery. As a result,
there may be residue in the extruder head or on the hot bed, but it should not affect normal use.
We provide the spare nozzle in the accessory kit just in case.
1.3 Risk statement
1)
Before color is mixing or monochrome printing, make sure that there is the filament in the
feeding tube on both sides of the extruder head to prevent back flushing of the molten
filament inside the extruder head, resulting in clogging.
2)
Make sure there is filament in feeding tubes on the both side of extruder head even using a
single-sided extruder for monochrome printing, moreover the filament in the other feeding
tube cannot be pulled out during the printing process.
3)
Please do not disassemble the printer without permission. If there is any problem, please
contact the after-sales service.
Shenzhen Getech Technology Co.,Ltd
4
Hide quick links:
Advertisement
Table of Contents
