Advertisement
How to Connect Elastix to NeoGate TA FXS Gateway
2. Preparation
NeoGate TA3200 attempts to contact a DHCP server in your network to obtain
valid network settings (e.g., the IP address, subnet mask, default gateway
address and DNS address) by default.
Before connecting NeoGate TA3200 to Elastix, you need to set a static IP
address from the same LAN with the Elastix.
Steps to set static IP for NeoGate TA3200:
1. Connect one analog phone in one of the FXS ports on NeoGate TA3200;
2. Dial "***" to enter the voice menu;
3. Press "1" to check the IP address;
4. Open the browser and type in the TA3200's IP address to access TA3200;
5. Log in TA3200 and go to System→Network Preferences→LAN Settings,
disable DHCP and configure the LAN network, save and apply the changes,
reboot NeoGate TA3200 to take effect.
Figure 2. Configure LAN Settings on NeoGate TA3200
http://www.yeastar.com
4/15
Advertisement
