Led Board - Advantech AWS-825B Manual

3.5 LED board

Before replacing the LED board, you must slide out the work
drawer. Follow these steps:
1. Switch off the power, and detach the main power cord.
2. Detach the work drawer from the AWS-825B/PB unit.
(See Fig. 2-1).
3. Slide the work drawer out as far as it will go.
4. Pull off the LED cable.
5. Unscrew the two screws, and replace the LED board.
(See Fig. 3-8.)
Figure 3-8: Removing the LED board
Chapter 3 Maintenance 29