Crt Monitor - Advantech AWS-825B Manual

3.3 CRT monitor

1. Switch off the power, and detach the main power cord.
2. Detach the work drawer and cover from the AWS-825B/PB
unit. (See Fig. 2-1.)
3. Slide the work drawer out as far as it will go.
4. Unscrew the 29 screws which hold the monitor. There are ten at
the rear, eleven on the right, four underneath, and two inside the
main chassis. There are also two screws which hold the chassis
support bracket that spans between the two side covers.
(See Figs. 3-3 and 3-4.)
5. Pull out the CRT monitor.
Figure 3-3: Removing the CRT monitor - first steps
24 AWS-825B/PB User's Manual