Connecting To A Paired Bluetooth Device - Sony MDR-XB50BS Help Manual

Help Guide
Wireless Stereo Headset
MDR-XB50BS

Connecting to a paired BLUETOOTH device

Turn on the headset.
1
Press and hold the
Make sure that the indicator (blue) flashes after you release the button. You hear voice guidance "Power on".
After the headset turns on, if it has automatically connected to the last connected device, you hear voice guidance
"BLUETOOTH connected".
Check the connection status on the BLUETOOTH device. If not connected, proceed to step 2.
Make the BLUETOOTH connection from the BLUETOOTH device.
2
For details, refer to the operating instructions supplied with your BLUETOOTH device.
When connected, you hear voice guidance "BLUETOOTH connected".
Hint
The above procedure is an example. For details, refer to the operating instructions supplied with your BLUETOOTH device.
If the BLUETOOTH device was connected with the headset the last time, an HFP/HSP connection is made when you turn on the headset. While
the headset is on, you can make an A2DP connection (music playback) by pressing the
button for about 2 seconds.
button.
65