Connecting To A Paired Bluetooth Device - Sony ULT WEAR Quick Start Manual

Help Guide
Wireless Noise Canceling Stereo Headset
ULT WEAR

Connecting to a paired Bluetooth device

Turn on the headset.
1
Press and hold the
You will hear a notification sound indicating that the headset is turned on.
The indicator (blue) continues to flash even after you release your finger from the button.
If the headset has automatically connected to the last connected device, you will hear a notification sound indicating
that the connection is established.
Check the connection status on the Bluetooth device. If it is not connected, proceed to step 2.
Make the Bluetooth connection from the Bluetooth device.
2
As for the operations on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth device.
When connected, you will hear a notification sound indicating that the connection is established.
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Bluetooth device.
Note
When connecting, [ULT WEAR], [LE_ULT WEAR], or both may be displayed on the connecting device. When both or [ULT WEAR]
is displayed, select [ULT WEAR]; when [LE_ULT WEAR] is displayed, select [LE_ULT WEAR].
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
(power) button (A) for about 2 seconds or more.
68