Connect The Battery; Add Engine Oil - Champion 100554 Operator's Manual

100554 - 3500W WIRELESS START GENERATOR
Install the Handle
1. Place the handle (G) inside the mounting channel on the
frame.
2. Secure the handle to the frame using an short pin (H).
3. Place an R-clip (I) on the end of the short pin and fasten
securely.
H
I

Connect the Battery

1. Remove the protective cover from the red (+) lead on the
battery.
2. Attach the red (+) lead to the red (+) terminal on the
battery with the bolt and secure with the nut.
3. Repeat for the black (–) battery lead.

Add Engine Oil

DO NOT attempt to crank or start the engine before it has
been properly filled with the recommended type and amount
of oil. Damage to the generator as a result of failing to follow
these instructions will void your warranty.
The generator rotor has a sealed, pre-lubricated ball bearing
that requires no additional lubrication for the life of the bearing.
The recommended oil type for typical use is 10W-30
automotive oil.
G
If running generator in extreme temperatures, refer to the
following chart for recommended oil type.
°F
°C
1. Place the generator on a flat, level surface.
2. Remove oil fill cap/dipstick to add oil.
3. Using a funnel, add up to 18.6 fl. oz. / 0.6 qt. (0.6 L) of
4. Check engine oil level at every use and add as needed.
CAUTION
NOTICE
NOTICE
Recommended Engine Oil Type
5W-30
5W-30 Synthetic
-20 0 20 40
-28.9 -17.8 -6.7 4.4
Ambient temperature
oil (not included) and replace oil fill cap/dipstick. DO NOT
OVERFILL.
ASSEMBLY
10W-30
10W-40
60 80 100 120
15.6 26.7 37.8 48.9
17