Advertisement
Quick Links
ULTIMATE
INSET LIVE FUEL EFFECT GAS FIRE
MODEL 417
OWNER GUIDE
THE NATURAL GAS MODEL IS FOR G20
AT A SUPPLY PRESSURE OF 20mbar
THE PROPANE GAS MODEL IS FOR G31
AT A SUPPLY PRESSURE OF 37mbar
THESE APPLIANCES ARE FOR USE IN THE UNITED KINGDOM (GB)
AND THE REPUBLIC OF IRELAND (IE) ONLY
THESE APPLIANCES ARE INSET LIVE FUEL EFFECT GAS FIRES.
THEY MUST NOT BE USED FOR ANY OTHER PURPOSE
This booklet is intended to help you use and care for your Valor gas fire
Please read thoroughly before using and keep for future reference.
We trust that these instructions give sufficient details to enable this appliance to be operated and
maintained satisfactorily. However, if you require further assistance, our Valor advice line will be
pleased to help - Ring 0345 626 341 (Local call rates apply).
If you need advice on any general matters concerning gas, the Gas Consumers' Council (GCC) is an independent organisation which
protects the interests of gas users. You will find their telephone number in your local telephone directory under Gas.
600A936/03
Advertisement
Related Manuals for Valor 417
Summary of Contents for Valor 417
- Page 1 THESE APPLIANCES ARE INSET LIVE FUEL EFFECT GAS FIRES. THEY MUST NOT BE USED FOR ANY OTHER PURPOSE This booklet is intended to help you use and care for your Valor gas fire Please read thoroughly before using and keep for future reference.
- Page 2 Maintenance Thank you for choosing this Valor gas appliance. This fire has been designed to give years of trouble-free service. To maintain its optimum performance, advantage should be taken of the regular servicing and inspection services available for gas appliances. For Valor servicing ring 0345 626 341 (Local rates apply).
- Page 3 Fig.1 Hearth dimensions & clearances Please observe the caution statements on the previous page. GAS CONSUMPTION Natural gas appliances have a maximum gas input at the high COST RUNNING setting of 6.0kW (Gross) and a minimum gas input at the low CONSUMPTION OF GAS COST...
- Page 4 OPERATING THE FIRE The flame sensing & flue blockage safety system. To turn off For your safety, this appliance is fitted with a flue blockage safety To turn the main burner off but leave the pilot alight, partially device which will shut down the appliance in the event of depress the knob and turn to PILOT/IGN.
- Page 5 Only the fuel bed parts supplied with this appliance or authorised front. Pull the coals forward so that they are immediately Valor replacements must be used. Never add extra coals above the behind the front rim of the burner compartment (See figure number stated in these instructions.
- Page 6 Place the rear base coal in the burner compartment behind Install the 7 loose coals as follows. The smooth surfaces of the front coal. Its rear face should touch the rear ceramic wall the coals should be at the bottom and back. (See figure 6).
- Page 7 5.2. 5.3. Place two of the remaining coals in the two outer valleys of Place the three remaining coals behind and approximately the front coal (One each side of the large coals) (See figure 9). midway between each of the coals in the front row (See Place the left side coal so that you will be able to see the pilot figure 10).
- Page 8 MAINTENANCE Debris from the chimney General servicing The opening at the back of the appliance must be always kept clear If you require any attention to your fire, contact your supplier of obstruction. If the chimney has previously been used for coal mentioning the model number.
- Page 9 BS EN ISO 9001 quality system accepted by the British Standards Institute. The Highest Standards Valor is a member of the Society of British Gas Industries which works to ensure high standards of safety, quality and performance. Careful Installation Valor is a Corgi registered company.