Advertisement
Quick Links
O
W
N
E
R
G
U
I
D
E
MODEL 4190 (For Natural Gas)
MODEL 4191 (For Propane Gas)
I n s e t L i v e F u e l E f f e c t
G a s F i r e s
with
U l t i m a t e F i r e s l i d e
or
F u s i o n
Front
This Owner Guide is intended to help you care for your Valor gas fire.
Please read carefully before using your gas fire and keep for future reference.
This Owner Guide gives sufficient details to enable your gas fire to be operated and
maintained.
IMPORTANT.
Please keep your Owner Guide in a safe place together with the
Installer Guide.
600A920/02
Advertisement
Related Manuals for Valor 4191
Summary of Contents for Valor 4191
- Page 1 F u s i o n Front This Owner Guide is intended to help you care for your Valor gas fire. Please read carefully before using your gas fire and keep for future reference. This Owner Guide gives sufficient details to enable your gas fire to be operated and maintained.
-
Page 2: Table Of Contents
Republic of Ireland (IE) only. Thank you for choosing Valor. All Valor gas fires are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years’ trouble-free service. Your owner guide aims to improve your understanding and appreciation of your Valor gas fire by providing simple and informative instructions to ensure that you benefit from the excellent performance and features it has to offer. -
Page 3: Safety
SAFETY IF YOU SMELL GAS DON’T SMOKE EXTINGUISH ALL NAKED FLAMES DON’T TURN ELECTRICAL SWITCHES ON OR OFF TURN OFF THE GAS SUPPLY AT THE METER OPEN DOORS AND WINDOWS TO GET RID OF THE GAS IMMEDIATELY CALL THE GAS EMERGENCY SERVICE - SEE YOUR LOCAL TELEPHONE DIRECTORY As with any gas appliance, this fire must be installed Never put any paper or other material on the fire. -
Page 4: Major Dimensions
6.0kW (Gross) and a minimum gas input at the low setting of 2.7 kW (Gross). Propane gas appliances (Model 4191) have a maximum gas input at the high setting of 6.1kW (Gross) and a minimum gas input at the low setting of 4.3 kW (Gross). -
Page 5: Operating The Fire
OPERATING THE FIRE The flame sensing & flue blockage safety system. For your safety, this appliance is fitted with a flue blockage safety device which will shut down the appliance in the event of abnormal flue conditions. This device is NOT a substitute for an independently mounted Carbon Monoxide detector. -
Page 6: Cleaning
If the fuel bed components are dislodged or removed, they must be refitted as follows: Only the fuel bed parts supplied with this appliance or authorised Valor replacements must be used. Never add extra coals above the number stated in these instructions. - Page 7 Place the rear base coal in the burner compartment behind the front coal. Its rear face should touch the rear ceramic wall (See figure 6). The ceramic side walls are marked at the rear bottom corners “L” (Left side) & “R” (Right side). Place the side walls against the sides of the fire box and in the recesses at the sides of the base coals.
-
Page 8: Maintenance
• In the United Kingdom servicing can be carried out either by a Valor Service engineer or a CORGI registered installer. • If you require your fire to be serviced, please contact Valor Service on 0121 386 6203 and quote the following details;... -
Page 9: Useful Telephone Numbers
Type of fire. c) Model/Name. d) Serial Number. e) The fault, problem or request. General advice about gas and your gas fire: VALOR ADVICELINE 0345 626341. To report faults or arrange for your fire to be serviced: VALOR SERVICE 0121 386 6203. - Page 10 BS EN ISO 9001 quality system accepted by the British Standards Institute. The Highest Standards Valor is a member of the Society of British Gas Industries which works to ensure high standards of safety, quality and performance. Careful Installation Valor is a Corgi registered company.