Table of Contents
Advertisement
Figure 75. Fascia components on the expansion enclosure
Procedure
1. Use the slide rails to pull the enclosure out of the rack, as described in
Remove the front (4U) fascia
2. Remove the front fascia by removing the two screws that attach the fascia to
"Removing an expansion enclosure from a rack: 2076-92F" on page 92. Ensure
that a mechanical lift is available to support the weight of the enclosure.
the flange on each side of the chassis, as shown in Figure 76 on page 84.
Chapter 2. Installing the Storwize V7000 Gen2 and Storwize V7000 Gen2+ hardware
x4
83
Advertisement
Table of Contents
