Table of Contents
Advertisement
Figure 35. Detaching the inner rail section
4. Use four M4 screws to attach the inner rail to the side of the enclosure.
Figure 36. Screw locations to attach the inner rail to the enclosure
5. Install the inner section of the rail onto each side of the expansion enclosure, as
Figure 36 shows the screw locations.
1
shown in Figure 37 on page 48.
Chapter 2. Installing the Storwize V7000 Gen2 and Storwize V7000 Gen2+ hardware
(a)
x2
47
Advertisement
Table of Contents
