IBM StorVize V7000 Gen2 Quick Installation Manual
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Storage
  5. StorVize V7000 Gen2
  6. Quick installation manual

IBM StorVize V7000 Gen2 Quick Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IBM Storwize V7000 Gen2 and Gen2+
MTM 2076-524, 2076-624, 2076-AF6, and 2076-92F
Quick Installation Guide
IBM
GC27-6500-08

Advertisement

Table of Contents
loading

Related Manuals for IBM StorVize V7000 Gen2

Summary of Contents for IBM StorVize V7000 Gen2

  • Page 1 IBM Storwize V7000 Gen2 and Gen2+ MTM 2076-524, 2076-624, 2076-AF6, and 2076-92F Quick Installation Guide GC27-6500-08...
  • Page 2 The general information in “Notices” on page 153 v The information in the “Safety and environmental notices” on page ix v The information in the IBM Environmental Notices and User Guide (provided on a DVD) This edition replaces GC27-6500-07.

  • Page 3: Table Of Contents

    Installing or replacing the support rails: 2076-92F 46 Installing or replacing an expansion enclosure in a rack: 2076-92F . . 49 Installing or replacing an expansion canister: 2076-92F . . 57 Removing or moving the cable-management arm: 2076-92F . . 58 © Copyright IBM Corp. 2014, 2017...
  • Page 4 Appendix A. Accessibility features for Germany Electromagnetic Compatibility Directive . . 156 Storwize V7000 ..149 People's Republic of China Class A Statement Taiwan Class A compliance statement . . 158 Appendix B.

  • Page 5: Figures

    87. Removing the 2076-92F enclosure from the 43. Install the expansion canister. . 58 rack . . 99 44. Upper and lower cable-management arms 88. Releasing the power supply handles . . 101 89. Removed power supply . . 102 © Copyright IBM Corp. 2014, 2017...
  • Page 6 90. Drive assembly . . 103 114. SAS cable connector orientation . . 124 91. Drive locations in a 2076-92F expansion 115. Connecting the SAS cables . . 126 enclosure . . 104 116. SAS port orientation on expansion enclosures 127 92.

  • Page 7: Tables

    Tables IBM websites for help, services, and Enclosure weight as FRUs are installed information . . xix LEDs on the secondary expander modules Storwize V7000 library . . xx Examples of supported SAS chain IBM documentation and related websites combinations.
  • Page 8 viii Storwize V7000 Gen2 and Gen2+: Quick Installation Guide...

  • Page 9: Safety And Environmental Notices

    A danger notice indicates the presence of a hazard that has the potential of causing death or serious personal injury. (D002) 2. Locate the IBM Storwize V7000 Safety Notices with the user publications that were provided with the Storwize V7000 hardware.

  • Page 10: Caution Notices For The Storwize V7000

    “Labels” section. Note: You can find and download the current IBM System Safety Notices by searching for Publication number G229-9054 in the IBM Publications Center.
  • Page 11 CAUTION: The battery contains lithium. To avoid possible explosion, do not burn or charge the battery. Do not: Throw or immerse into water, heat to more than 100°C (212°F), repair or disassemble. (C003) CAUTION: > _ 33.6-46.3 kg (74-102 lbs) 46.3-61.7 kg (102-136 lbs) 61.7-100 kg (136-220 lbs) The weight of this part or unit is more than 55 kg (121.2 lb).
  • Page 12 CAUTION: CAUTION regarding IBM provided VENDOR LIFT TOOL: v Operation of LIFT TOOL by authorized personnel only v LIFT TOOL intended for use to assist, lift, install, remove units (load) up into rack elevations. It is not to be used loaded transporting over major ramps nor as a replacement for such designated tools like pallet jacks, walkies, fork trucks and such related relocation practices.
  • Page 13 v Do not operate while under the influence of drugs or alcohol. v Do not support ladder against LIFT TOOL. v Tipping hazard. Do not push or lean against load with raised platform. v Do not use as a personnel lifting platform or step. No riders. v Do not stand on any part of lift.

  • Page 14: Danger Notices For Storwize V7000

    Ensure that you are familiar with the danger notices for Storwize V7000. Use the reference numbers in parentheses at the end of each notice (for example, D005) to find the matching translated notice in IBM Storwize V7000 Safety Notices. Storwize V7000 Gen2 and Gen2+: Quick Installation Guide...
  • Page 15 Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: v If IBM supplied a power cord(s), connect power to this unit only with the IBM provided power cord. Do not use the IBM provided power cord for any other product.
  • Page 16 DANGER: Serious injury or death can occur if loaded lift tool falls over or if a heavy load falls off the lift tool. Always completely lower the lift tool load plate and properly secure the load on the lift tool before moving or using the lift tool to lift or move an object.

  • Page 17: Special Caution And Safety Notices

    Do not transport the rack via fork truck unless it is properly packaged, secured on top of the supplied pallet. (R004) DANGER: Main Protective Earth (Ground): This symbol is marked on the frame of the rack. The PROTECTIVE EARTHING CONDUCTORS should be terminated at that point. A recognized or certified closed loop connector (ring terminal) should be used and secured to the frame with a lock washer using a bolt or stud.

  • Page 18: Handling Static-Sensitive Devices

    Environmental notices The IBM Systems Environmental Notices contains all of the required environmental notices for IBM Systems products in English and other languages. The IBM Systems Environmental Notices (http://ibm.co/1fBgWFI) includes...

  • Page 19: About This Guide

    Storwize V7000. IBM Knowledge Center for Storwize V7000 The information collection in the IBM Knowledge Center contains all of the information that is required to install, configure, and manage the system. The information collection in the IBM Knowledge Center is updated between product releases to provide the most current documentation.

  • Page 20: Ibm Publications Center

    Each PDF publication in the Table 2 library is also available in the IBM Knowledge Center by clicking the number in the “Order number” column: Table 2. Storwize V7000 library Title Description Order number IBM Storwize V7000 Gen2 and Gen2+...

  • Page 21: Related Websites

    A detailed description of any information that should be changed How to get information, help, and technical assistance If you need help, service, technical assistance, or just want more information about IBM products, you will find a wide variety of sources available from IBM to assist you. Information...
  • Page 22 Before calling for support, be sure to have your IBM Customer Number available. If you are in the US or Canada, you can call 1 (800) IBM SERV for help and service. From other parts of the world, see http://www.ibm.com/planetwide for the number that you can call.
  • Page 23 Purchasing the IBM Support Line offering gives you access to this professional advice while deploying your system, and in the future.
  • Page 24 xxiv Storwize V7000 Gen2 and Gen2+: Quick Installation Guide...

  • Page 25: Chapter 1. Before You Begin The Installation

    Important information: v This guide presumes that you have read the planning information regarding your physical environment that is available from the IBM Knowledge Center for Storwize V7000. v Ensure that any cables that you are supplying are available for installation.

  • Page 26: Enclosure

    Table 5. Steps for different installation scenarios. New system (control Adding control enclosure and one or Adding expansion enclosures and New system (control more expansion enclosures to an expansion enclosures enclosure only) enclosures) existing system to an existing system “Reviewing your “Reviewing your “Reviewing your “Reviewing your...
  • Page 27 Table 5. Steps for different installation scenarios (continued). New system (control Adding control enclosure and one or Adding expansion enclosures and New system (control more expansion enclosures to an expansion enclosures enclosure only) enclosures) existing system to an existing system Chapter 3, “Powering on the “Powering on the...
  • Page 28 Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: – If IBM supplied a power cord(s), connect power to this unit only with the IBM provided power cord. Do not use the IBM provided power cord for any other product.

  • Page 29: Reviewing Your Packing Slip

    IBM Storwize V7000 Gen2+ Control Enclosure 6195-524 3 years IBM Storwize V7000 Gen2 Control Enclosure 2076-12F 3 years IBM Storwize V7000 12-slot Expansion Enclosure for 3.5-inch drives 2076-24F 3 years IBM Storwize V7000 24-slot Expansion Enclosure for 2.5-inch drives 2076-AFF 3 years IBM Storwize V7000 24-slot Expansion Enclosure for 2.5-inch...

  • Page 30: Identify The Hardware Components

    Options applicable to control enclosures Note: All options other than cables are preinstalled. __ v 64 GB main memory upgrade __ v Cache memory upgrade __ v Four-port 8 Gbps Fibre Channel host interface adapter with two small form-factor pluggable (SFP) transceivers installed __ v Fibre Channel cables __ v SAS cables __ v Four-port 10 Gbps iSCSI / FCoE host interface adapter...

  • Page 31: Data Ports In The Rear Of The Storwize V7000

    Data ports Figure 2 shows the rear view of a Storwize V7000 control enclosure and identifies the location of the ports. Figure 2. Data ports in the rear of the Storwize V7000 control enclosure 1 USB ports. Each canister has two USB ports. 2 Ethernet ports.

  • Page 32: Control Enclosure Support Rails Of A Storwize

    Figure 3. Control enclosure support rails of a Storwize V7000 system Expansion enclosure components Figure 4 shows the location of the power supply units and expansion canisters. 1 Expansion canisters 2 Power supply units Figure 4. Rear view of a Storwize V7000 expansion enclosure Figure 5 on page 9 shows the LEDs and SAS port locations from the rear view of an expansion canister.

  • Page 33: Identifying Storwize V7000 2076-624 Node Canisters

    Figure 5. SAS ports and LEDs in rear view of a Storwize V7000 expansion canister Expansion enclosure support rails The left and right expansion enclosure support rails (Figure 6) are designed specifically for installation of an expansion enclosure. v The ledge on the inside of each rail supports the entire length of an expansion enclosure.

  • Page 34: Verify Environmental Requirements

    From the outside, the node canisters are structurally identical. However, the 2076-624 node canister contains the following hardware components that are different from the 2076-524 node canister. All other components of the 2076-624 node canister are the same as those components in the 2076-524. v New Intel CPU platform v PCIe adapter slot 2 (middle slot) connector that is increased from x8 to x16 PCIe connector, although the upper eight PCIe lanes are not connected.

  • Page 35: Review Enclosure Location Guidelines

    If you have not done the environmental planning for your system, see the “Storwize V7000 physical installation planning” topic in the IBM Knowledge Center for Storwize V7000. Review enclosure location guidelines Before you install the enclosures, you must be familiar with these enclosure location guidelines.
  • Page 36 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide...

  • Page 37: Chapter 2. Installing The Storwize V7000 Gen2 And Storwize V7000 Gen2+ Hardware

    Push one looped end of a spring over one stud on the inside of the rail. (See Figure 9 on page 14.) Note: Some models of rail have the studs on the outside of the rail. © Copyright IBM Corp. 2014, 2017...

  • Page 38: Installing The Rail Spring

    c. Stretch the spring slightly and push the other looped end of the spring onto the other stud on the inside of the rail. Figure 9. Installing the rail spring 3. Working at the front of the rack cabinet, identify the two standard rack units (2U) of space in the rack into which you want to install the support rails.

  • Page 39: Hole Locations In The Front Of The Rack

    Figure 10. Hole locations in the front of the rack 1 Upper rail-mounting bracket pin 2 Lower rail-mounting bracket pin 3 Rack mounting screw hole 4. Ensure that the appropriate bracket pins are installed in the front and rear bracket of each rail. Each rail comes with four medium pins preinstalled (two in the front bracket and two in the rear bracket).

  • Page 40: Opening The Hinge Brackets

    Figure 11. Opening the hinge brackets 6. Align the holes in the rail bracket with the holes on the front and rear rack cabinet flanges. Ensure that the rails are aligned on the inside of the rack cabinet. 7. On the rear of the rail, press the two bracket pins into the holes in the rack flanges.

  • Page 41: Installing Support Rails For Storwize V7000 Gen2 And Storwize V7000 Gen2+ Expansion Enclosures

    Installing support rails for Storwize V7000 Gen2 and Storwize V7000 Gen2+ expansion enclosures Before you install expansion enclosures, you must first install support rails. Procedure To install the support rails, complete the following steps. 1. Locate the expansion enclosure rails (Figure 13). The rail assembly consists of two rails that must be installed in the rack cabinet.

  • Page 42: Installing The Rail Spring

    Figure 14. Installing the rail spring 4. Working at the front of the rack cabinet, identify the two standard rack units (2U) of space in the rack into which you want to install the support rails. Figure 15 on page 19 shows two rack units with the front mounting holes identified.

  • Page 43: Hole Locations In The Front Of The Rack

    Figure 15. Hole locations in the front of the rack 1 Upper rail mounting bracket pin 2 Lower rail mounting bracket pin 3 Rack mounting screw hole 5. Ensure that the appropriate bracket pins are installed in the front and rear bracket of each rail.

  • Page 44: Opening The Hinge Brackets

    Figure 16. Opening the hinge brackets 7. Align the holes in the rail bracket with the holes on the front and rear rack cabinet flanges. Ensure that the rails are aligned on the inside of the rack cabinet. 8. On the rear of the rail, press the two bracket pins into the holes in the rack flanges.

  • Page 45: Installing The Enclosures

    Installing the enclosures Following your enclosure location plan, install each control enclosure and optionally, one or more expansion enclosures. About this task The installation procedure applies equally to control enclosures and expansion enclosures. v Lifting a control enclosure requires at least three people. v Lifting an expansion enclosure requires at least two people.

  • Page 46: Inserting The Enclosure

    3. Slide the enclosure into the rack along the rails until the enclosure is fully inserted (see Figure 19). Note: The rails are not designed to hold an enclosure that is partially inserted. The enclosure must always be in a fully inserted position. Control enclosures must be installed only on the supplied control enclosure rails.

  • Page 47: Connecting Sas Cables To Expansion Enclosures

    Figure 20. Reinstalling enclosure end caps Connecting SAS cables to expansion enclosures If you have installed expansion enclosures, you must connect them to a control enclosure. About this task This task applies if you are installing one or more expansion enclosures. Each control enclosure in the system can manage two sets of expansion enclosures;...

  • Page 48: Connecting The Sas Cables

    Figure 21. Connecting the SAS cables 2. To add a second expansion enclosure chain to the control enclosure, use the supplied SAS cables to connect the control enclosure to the expansion enclosure at rack position 2. Refer to Figure 21 for an example. a.

  • Page 49: Sas Cabling Guidelines

    SAS cabling guidelines When connecting SAS cables between 2U expansion enclosures, you must follow a list of guidelines to ensure that your configuration is valid. Orienting the connector When inserting SAS cables, make sure the connector (Figure 22) is oriented correctly.

  • Page 50: Installing An Optional 5U Sas Expansion Enclosure

    v A connected port on the node canister must connect to a single port on an expansion canister. Cables that split the connector out into separate physical connections are not supported. v Attach cables serially between enclosures; do not skip an enclosure. v The last enclosure in a chain must not have cables in port 2 of canister 1 and port 2 of canister 2.

  • Page 51: Safety Notices And Considerations: 2076-92F

    Safety notices Use the reference numbers in parentheses at the end of each notice (for example, D005) to find the matching translated notice in IBM Storwize V7000 Safety Notices. DANGER DANGER: Serious injury or death can occur if loaded lift tool falls over or if a heavy load falls off the lift tool.
  • Page 52 DANGER >240VA Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in splattered metal, burns, or both. (L005) DANGER: Observe the following precautions when working on or around your IT rack system: v Heavy equipment–personal injury or equipment damage might result if mishandled.
  • Page 53 CAUTION: v Do not install a unit in a rack where the internal rack ambient temperatures will exceed the manufacturer's recommended ambient temperature for all your rack-mounted devices. v Do not install a unit in a rack where the air flow is compromised. Ensure that air flow is not blocked or reduced on any side, front, or back of a unit used for air flow through the unit.
  • Page 54 CAUTION: Removing components from the upper positions in the rack cabinet improves rack stability during a relocation. Follow these general guidelines whenever you relocate a populated rack cabinet within a room or building. v Reduce the weight of the rack cabinet by removing equipment starting at the top of the rack cabinet.
  • Page 55 This symbol is marked on the frame of the rack. The PROTECTIVE EARTHING CONDUCTORS should be terminated at that point. A recognized or certified closed loop connector (ring terminal) should be used and secured to the frame with a lock washer using a bolt or stud. The connector should be properly sized to be suitable for the bolt or stud, the locking washer, the rating for the conducting wire used, and the considered rating of the breaker.
  • Page 56 CAUTION: CAUTION regarding IBM provided VENDOR LIFT TOOL: v Operation of LIFT TOOL by authorized personnel only v LIFT TOOL intended for use to assist, lift, install, remove units (load) up into rack elevations. It is not to be used loaded transporting over major ramps nor as a replacement for such designated tools like pallet jacks, walkies, fork trucks and such related relocation practices.

  • Page 57: Weight Considerations: 2076-92F

    v Do not operate while under the influence of drugs or alcohol. v Do not support ladder against LIFT TOOL. v Tipping hazard. Do not push or lean against load with raised platform. v Do not use as a personnel lifting platform or step. No riders. v Do not stand on any part of lift.

  • Page 58: Weight Of Expansion Enclosure Parts

    v Always use a suitably rated mechanical lift or four persons when you are performing any of the following tasks: – Removing the expansion enclosure from its packing material – Lifting and installing the expansion enclosure in the rack for the first time –...

  • Page 59: Weight Of Expansion Enclosure Drives

    Weight of expansion enclosure SAS drives The SAS drives are shipped in a separate package from the 2076-92F expansion enclosure. The enclosure can support up to 92 SAS drives; however, the quantity varies depending on the number of drives ordered. Table 10 summarizes the weights of the SAS drives that are supported in the 2076-92F expansion enclosure.

  • Page 60: Weight Of An Enclosure With 92 Sas Drives

    Table 11. Weight of an enclosure with 92 SAS drives Approximate weigh per unit Approximate extra weight Maximum FRU description supported 2.5-inch tier 0 0.224 0.494 20.608 45.433 flash drive 2.5-inch tier 1 flash drive 2.5-inch hard disk 0.304 0.670 27.968 61.659 drive...
  • Page 61 Table 12. Enclosure weight as FRUs are installed (continued) Enclosure assembly Approximate weight FRUs installed FRUs not installed Note: The following FRUs 61.5 135.4 v Fascia (1U and 4U) are installed when the v Drives enclosure is initially shipped. v Enclosure (01LJ112) v Secondary expansion modules v PSUs...

  • Page 62: Identify The Hardware Components: 2076-92F

    Conversely, the overall weight of the expansion enclosure is reduced as you remove parts. However, even with parts removed, the 2076-92F expansion enclosure is heavy. Depending on the number of parts that remain, you might need four persons or a mechanical lift to support the weight of the expansion enclosure. Identify the hardware components: 2076-92F You should become familiar with the external components of the 2076-92F expansion enclosure.

  • Page 63: Front Fascia Of The 2076-92F Expansion

    Figure 25. Front fascia of the 2076-92F expansion enclosure Components on the rear of the enclosure Figure 26 shows the components on the rear of the 2076-92F expansion enclosure. Four fan modules and two expansion enclosures are accessible from the back of the enclosure.

  • Page 64: F Support Rails

    3 Fan module 4 Fan release latch 5 Fan fault indicator 6 Expansion canister 7 SAS ports and indicators 8 Expansion canister indicators 9 Power cable connector for PSU 1 Support rails Figure 27 shows the support rails for the expansion enclosure. The support rails are packaged separately from the expansion enclosure.

  • Page 65: Unpacking And Installing The Enclosure: 2076-92F

    Figure 28. 2076-92F CMA assemblies Unpacking and installing the enclosure: 2076-92F Before you unpack and install the 2076-92F expansion enclosure, ensure that you review and follow the installation checklist and safety notices. Before you begin CAUTION: > _ 33.6-46.3 kg (74-102 lbs) 46.3-61.7 kg (102-136 lbs) 61.7-100 kg (136-220 lbs) The weight of this part or unit is more than 55 kg (121.2 lb).

  • Page 66: Tray Containing Expansion Enclosure Parts

    v Ensure that a suitably rated mechanical lift is available to support the weight of the expansion enclosure as it inserted into the rack for installation. About this task The 2076-92F expansion enclosure and most parts are shipped together in one large box.

  • Page 67: Packaging Materials

    Figure 30. Packaging materials 1 Enclosure 2 Top of shipping box, folded back 3 Foam protectors 4. Remove the top cover, as described in “Removing the top cover: 2076-92F” on page 44. 5. With two or more persons, push the expansion enclosure sideways onto an adjacent flat bed lift.

  • Page 68: Removing The Top Cover: 2076-92F

    Figure 31. Packaging for fascia 1 4U fascia (front) 2 1U fascia (power supply units) 12. Attach the 4U and 1U fascia to the front of the enclosure, as described in “Installing or replacing the fascia: 2076-92F” on page 77. 13.

  • Page 69: Releasing The 2076-92F Cover

    minutes of its removal. When the cover is removed, the reduction in airflow through the enclosure might cause the enclosure or its components to shut down to protect from overheating. Procedure 1. Use the slide rails to pull the enclosure out from the rack. See “Removing an expansion enclosure from a rack: 2076-92F”...

  • Page 70: Installing Or Replacing The Support Rails: 2076-92F

    6. To reinstall the cover, or replace it with one from FRU stock, follow the procedure in “Installing or replacing the top cover: 2076-92F” on page 68. Installing or replacing the support rails: 2076-92F You must install the support rails before you can install a 2076-92F expansion enclosure in a rack.

  • Page 71: Detaching The Inner Rail Section

    Figure 35. Detaching the inner rail section 4. Use four M4 screws to attach the inner rail to the side of the enclosure. Figure 36 shows the screw locations. Figure 36. Screw locations to attach the inner rail to the enclosure 5.

  • Page 72: Attaching The Inner Rail Section To The

    M4x6L Figure 37. Attaching the inner rail section to the enclosure 6. Use the M5 screws to install the outer rail member and bracket assembly to the rack, as shown in Figure 38. M5x13L Rear Bracket Front Bracket M5x13L Figure 38. Installing the rail assembly to the rack frame For example, Figure 39 on page 49 shows the front of the rail that is attached to the frame.

  • Page 73: Installing Or Replacing An Expansion Enclosure In A Rack: 2076-92F

    Figure 39. Example of required rack space 7. Repeat steps 5 on page 47 through 6 on page 48 to install the opposite rail. 8. Install the expansion enclosure in the rack, as described in “Installing or replacing an expansion enclosure in a rack: 2076-92F.” Installing or replacing an expansion enclosure in a rack: 2076-92F Use the following procedure to place the 2076-92F expansion controller in a rack...
  • Page 74 (L003) Use the reference numbers in parentheses at the end of each notice (for example, D005) to find the matching translated notice in IBM Storwize V7000 Safety Notices. DANGER: Observe the following precautions when working on or around your IT rack system: v Heavy equipment–personal injury or equipment damage might result if mishandled.
  • Page 75 CAUTION: v Do not install a unit in a rack where the internal rack ambient temperatures will exceed the manufacturer's recommended ambient temperature for all your rack-mounted devices. v Do not install a unit in a rack where the air flow is compromised. Ensure that air flow is not blocked or reduced on any side, front, or back of a unit used for air flow through the unit.
  • Page 76 CAUTION: Removing components from the upper positions in the rack cabinet improves rack stability during a relocation. Follow these general guidelines whenever you relocate a populated rack cabinet within a room or building. v Reduce the weight of the rack cabinet by removing equipment starting at the top of the rack cabinet.
  • Page 77 (C012) CAUTION: CAUTION regarding IBM provided VENDOR LIFT TOOL: v Operation of LIFT TOOL by authorized personnel only v LIFT TOOL intended for use to assist, lift, install, remove units (load) up into rack elevations.
  • Page 78 v Do not operate while under the influence of drugs or alcohol. v Do not support ladder against LIFT TOOL. v Tipping hazard. Do not push or lean against load with raised platform. v Do not use as a personnel lifting platform or step. No riders. v Do not stand on any part of lift.

  • Page 79: Example Installation Of The Enclosure In The

    v Always use a suitably rated mechanical lift or four persons to raise the enclosure to install it in the rack. Even after the drives, power supply units, secondary expander modules, canisters, fans, and top cover are removed, the enclosure weighs 43 kg (95 lbs).

  • Page 80: Replacing The 2076-92F Enclosure In The Rack

    Figure 41. Replacing the 2076-92F enclosure in the rack 2. Ensure that the ball bearing retainer clicks into place inside the front of the left and right drawer sections ( 2 in Figure 41). Reinstalling parts into the enclosure 3. If you took the enclosure out of the rack, reinstall the following parts inside of the enclosure, as described in the following topics.

  • Page 81: Installing Or Replacing An Expansion Canister: 2076-92F

    Installing or replacing an expansion canister: 2076-92F You can reinstall an expansion canister in a 2076-92F expansion enclosure or replace a faulty expansion canister with one from FRU stock. Before you begin Important: You can replace an expansion canister without powering off the expansion enclosure.

  • Page 82: Removing Or Moving The Cable-Management Arm: 2076-92F

    Figure 43. Install the expansion canister 5. Reconnect all the SAS cables to the appropriate SAS ports on the expansion canister, as described in “Removing and installing a SAS cable: 2076-92F” on page 85. 6. Reconnect the elbow of the lower cable management arm to the inner member of the slide rail.

  • Page 83: Upper And Lower Cable-Management Arms

    Figure 44. Upper and lower cable-management arms To complete many service tasks, you can swing the CMA assemblies away from the expansion enclosure. You do not have to completely remove the CMA assemblies from the enclosure. For these service tasks, complete step 1 on page 62 through step 4 on page 63 in “Moving the cable management arms”...

  • Page 84: Connectors For The Upper Cable Management

    Figure 45. Connectors for the upper cable management arm 1 Inner connector on the upper CMA 2 Connector base on inner rail member 3 Outer connector on the upper CMA 4 Connector base on outer rail member 5 Support rail connector on the upper CMA 6 Connector base on outer rail member 1.

  • Page 85: Components Of The Lower Cma Assembly

    Figure 46. Components of the lower CMA assembly 6. Remove the connector base on the lower CMA assembly ( 11 ) from the connector on the left support rail ( 12 ), as Figure 46. 7. Remove the inner connector of the lower CMA assembly ( 9 ) from the outer member of the right support rail ( 10 ), as shown in Figure 46.

  • Page 86: Upper And Lower Cma Assemblies Moved

    Figure 47. Upper and lower CMA assemblies moved aside Figure 48 shows that the lower CMA assembly is swung away from the rear of the enclosure so that the expansion canister is accessible. Figure 48. Lower CMA assembly moved Procedure 1.

  • Page 87: Installing Or Replacing The Cable-Management Arm: 2076-92F

    s i s Figure 49. Release the upper CMA assembly 2. Move the upper CMA to the left to swing it out of the way. a. To reattach the upper CMA to the rail, reverse the procedure. 3. To release the lower CMA, push the latch on the support rail connector 11 to release it from the connector base 12 on the left rail.

  • Page 88: Upper And Lower Cable-Management Arms

    Figure 51. Upper and lower cable-management arms As Figure 52 shows, the support rail connectors of each CMA assembly are installed on the rail hooks at the end of the support rails. Figure 52. Upper and lower cable-management arms Procedure 1.

  • Page 89: Connectors For The Cable Management Arm

    Figure 53. Connectors for the cable management arm 1 Inner connector on upper CMA 2 Connector base on inner rail member 3 Outer connector on upper CMA 4 Connector base on outer rail member 5 Support rail connector on upper CMA 6 Connector base on outer rail member 2.

  • Page 90: Install The Inner Connector Of The Upper Cma

    Figure 55. Install the inner connector of the upper CMA to the inner member of the support rail 4. Attach the support rail connector on the upper CMA assembly ( 5 ) to the connector base on the right support rail ( 6 ), as shown in Figure 56. Figure 56.

  • Page 91: Comparing The Location Of The Components Of

    Figure 57. Comparing the location of the components of the CMA assemblies 7 Inner connector on lower CMA 8 Connector base on inner rail member 9 Outer connector on lower CMA 10 Connector base on outer rail member 11 Support rail connector the lower CMA 12 Connector base on outer rail member 5.

  • Page 92: Installing Or Replacing The Top Cover: 2076-92F

    Installing or replacing the top cover: 2076-92F You can replace the top cover on a 2076-92F expansion enclosure during the installation process or after you complete a service task. Before you begin Important: You can install the cover while the expansion enclosure is powered on. To maintain operating temperature, replace the cover within 15 minutes of completing other service tasks.

  • Page 93: Installing Or Replacing A Drive: 2076-92F

    Figure 59. Replacing the 2076-92F top cover 4. Verify that the cover correctly engages the cover release latch and all of the inset tabs on the expansion enclosure. 5. Lock the cover into position by sliding the release lever 4 , as shown in Figure 60 Figure 60.

  • Page 94: Drive Assembly

    management GUI. The fix procedures minimize the risk of losing data or access to data; the procedures also manage the system's use of the drive. About this task The 2076-92F expansion enclosure supports 92 drives. Figure 61 shows an example of a drive assembly.

  • Page 95: Drive Locations In A 2076-92F Expansion

    Figure 62. Drive locations in a 2076-92F expansion enclosure The drive slots must be populated sequentially, starting from the back-left corner position (slot 1, grid A1). Sequentially install the drive in the slots from left to right and back row to front. Always complete a full row before you install drives in the next row.

  • Page 96: Incorrect Drive Installation

    Figure 64. Incorrect drive installation 5. Touch the static-protective package that contains the drive to any unpainted metal surface on the enclosure. Wear an anti-static wrist strap to remove the drive from the package. 6. Ensure that the drive handle ( 1 in Figure 65 on page 73) of the drive assembly is in the open (unlocked) position.
  • Page 97 Figure 65. Replace the drive 9. Rotate the handle down to lock the drive assembly into the chassis ( 3 in Figure 65). Chapter 2. Installing the Storwize V7000 Gen2 and Storwize V7000 Gen2+ hardware...

  • Page 98: Installing Or Replacing A Secondary Expander Module: 2076-92F

    Use caution when you are removing or replacing a secondary expander module from an enclosure (01LJ112) that is powered on. Avoid contact with the connectors on the main board. Only an IBM Service Support Representative (SSR) can remove the secondary expander module if the 01LJ112 enclosure is powered.

  • Page 99: Location Of Secondary Expander Modules

    the cover off an operational enclosure for more than 15 minutes. The reduction in airflow through the enclosure might cause the enclosure or its components to shut down to protect from overheating. About this task The 2076-92F expansion enclosure contains two secondary expander modules, as Figure 66 shows.

  • Page 100: Leds On A Secondary Expansion Module

    Figure 67. LEDs on a secondary expansion module 1 Online indicator 2 Fault indicator 3. Rotate both handles on the new secondary expander module to an open position, as shown in Figure 68. Figure 68. Open the secondary expander module handles 4.

  • Page 101: Installing Or Replacing The Fascia: 2076-92F

    Figure 69. Replace the secondary expander module 5. Press the secondary expander module down into position in the enclosure. 6. Rotate the handles on the secondary expander module to the closed position to lock it in the enclosure. 7. If needed, repeat step 3 on page 76 through step 6 to replace the other secondary expander module.

  • Page 102: Fascia Components On The Expansion Enclosure

    Figure 70. Fascia components on the expansion enclosure Note: When the expansion enclosure is shipped, the 4U and 1U fascia are not installed. You must install them as part of the initial installation process. Procedure 1. Use the slide rails to pull the enclosure out of the rack, as described in “Removing an expansion enclosure from a rack: 2076-92F”...

  • Page 103: Installing Or Replacing A Power Supply: 2076-92F

    Figure 71. Replace fascia components on the expansion enclosure Installing or replacing a power supply: 2076-92F Use the following procedures to replace either of the redundant power supplies in the 2076-92F expansion enclosure. The redundant power supplies operate in parallel; one continues to provide power to the enclosure if the other fails. Before you begin Important: You can replace a PSU without powering off the expansion enclosure.

  • Page 104: Preparing To Install The Power Supply

    About this task This task assumes that the following conditions are met: v You removed the PSU, following the procedure described in “Removing a power supply: 2076-92F” on page 100. v You removed the fascia that covers the PSU from the front of the expansion enclosure, as described in “Removing the fascia: 2076-92F”...

  • Page 105: Install The Power Supply

    Figure 73. Install the power supply 4. Close the handles on the PSU and ensure the handle lock clicks in to place. 5. Verify that the AC input and the DC power indicators are lit on the front of the PSU, as shown in Figure 74 on page 82.

  • Page 106: Removing The Fascia: 2076-92F

    Figure 74. Power supply indicators For more information about the power supply indicators, see “Storwize V7000 2076-92F expansion enclosure LEDs and indicators” on page 131. Removing the fascia: 2076-92F To perform service tasks, you can remove each component of the fascia from the front of a 2076-92F expansion enclosure.

  • Page 107: Fascia Components On The Expansion Enclosure

    Figure 75. Fascia components on the expansion enclosure Procedure 1. Use the slide rails to pull the enclosure out of the rack, as described in “Removing an expansion enclosure from a rack: 2076-92F” on page 92. Ensure that a mechanical lift is available to support the weight of the enclosure. Remove the front (4U) fascia 2.

  • Page 108: Remove Fascia Components From The Expansion Enclosure

    Figure 76. Remove fascia components from the expansion enclosure Remove the bottom (1U) fascia 3. Gently pull on each side of the PSU fascia to remove it from the chassis, as shown in Figure 76. The PSU fascia will disengage from the slot and pin that connect it to each side of the chassis You must remove the bottom fascia to access and service either PSU.

  • Page 109: Removing And Installing A Sas Cable: 2076-92F

    Figure 77. Fascia removed from the PSUs Replace the fascia 4. To reinstall the front or PSU fascia, or replace them with parts from FRU stock, follow the procedure in “Installing or replacing the fascia: 2076-92F” on page Removing and installing a SAS cable: 2076-92F Use the following procedures to attach SAS cables to the 2076-92F enclosure during the initial installation process.

  • Page 110: Correct Orientation For Sas Cable Connectors

    1. Locate the connector at the end of the SAS cable that is to be removed from the expansion enclosure. 2. Grasp the connector by its blue tag. Pull the tag. 3. Release the connector and slide it out of the SAS port. 4.

  • Page 111: Example Of Sas Cables Routed Through The Cable Management Arms

    Figure 79. Example of SAS cables routed through the cable management arms 9. When both ends of a SAS cable are correctly connected, the green link-LED next to the connected SAS ports are lit. For example, Figure 80 on page 88 shows the LEDs of expansion canister 1 on a 2076-92F expansion enclosure.

  • Page 112: Installing Or Replacing A Fan Module: 2076-92F

    Figure 80. SAS cable correctly inserted into the SAS port Installing or replacing a fan module: 2076-92F You can reinstall a fan module or replace a faulty fan module in a 2076-92F expansion enclosure. Before you begin Important: You can replace a fan module without powering off the expansion enclosure.

  • Page 113: Installing Or Replacing A Fan Interface Board: 2076-92F

    Figure 81. Fan module orientation 2. Carefully insert the fan module into the chassis until it clicks in place, as shown in Figure 82. Replacing all fan modules Figure 82. Replace fan module 3. Repeat steps 1 on page 88 and 2 for each fan module to be replaced. 4.

  • Page 114: Fib Parts For The Chassis

    v The expansion enclosure is removed from the rack, as described in “Removing an expansion enclosure from a rack: 2076-92F” on page 92. v A lift is supporting the weight of the enclosure. v The top cover, fans, drives, and other heavy FRUs are removed from the enclosure.

  • Page 115: Insert The New Fib In The Chassis

    Figure 84. Insert the new FIB in the chassis 3. Use a cross head screwdriver to tighten the retaining screws that secure the FIB to the drive board, as shown in Figure 85. Figure 85. Secure the FIB to the drive board Chapter 2.

  • Page 116: Removing An Expansion Enclosure From A Rack: 2076-92F

    4. If needed, repeat steps 2 on page 90 and 3 on page 91 to replace the other FIB. 5. Replace the narrow metal cover, which is shown in Figure 86, over the FIB assemblies. The attachment screws are on each side of the chassis. Figure 86.
  • Page 117 (L003) Use the reference numbers in parentheses at the end of each notice (for example, D005) to find the matching translated notice in IBM Storwize V7000 Safety Notices. DANGER: Observe the following precautions when working on or around your IT rack system: v Heavy equipment–personal injury or equipment damage might result if mishandled.
  • Page 118 CAUTION: v Do not install a unit in a rack where the internal rack ambient temperatures will exceed the manufacturer's recommended ambient temperature for all your rack-mounted devices. v Do not install a unit in a rack where the air flow is compromised. Ensure that air flow is not blocked or reduced on any side, front, or back of a unit used for air flow through the unit.
  • Page 119 CAUTION: Removing components from the upper positions in the rack cabinet improves rack stability during a relocation. Follow these general guidelines whenever you relocate a populated rack cabinet within a room or building. v Reduce the weight of the rack cabinet by removing equipment starting at the top of the rack cabinet.
  • Page 120 This symbol is marked on the frame of the rack. The PROTECTIVE EARTHING CONDUCTORS should be terminated at that point. A recognized or certified closed loop connector (ring terminal) should be used and secured to the frame with a lock washer using a bolt or stud. The connector should be properly sized to be suitable for the bolt or stud, the locking washer, the rating for the conducting wire used, and the considered rating of the breaker.
  • Page 121 CAUTION: CAUTION regarding IBM provided VENDOR LIFT TOOL: v Operation of LIFT TOOL by authorized personnel only v LIFT TOOL intended for use to assist, lift, install, remove units (load) up into rack elevations. It is not to be used loaded transporting over major ramps nor as a replacement for such designated tools like pallet jacks, walkies, fork trucks and such related relocation practices.
  • Page 122 v Do not operate while under the influence of drugs or alcohol. v Do not support ladder against LIFT TOOL. v Tipping hazard. Do not push or lean against load with raised platform. v Do not use as a personnel lifting platform or step. No riders. v Do not stand on any part of lift.

  • Page 123: Removing The 2076-92F Enclosure From The

    even after you remove the drives, power supply units, secondary expander modules, canisters, fans, and cover, the enclosure weighs 43 kg (95 lbs). Procedure Sliding the expansion enclosure out of the rack Note: You can accomplish most service actions when the expansion enclosure is fully extended from the rack on its slide rails.

  • Page 124: Removing A Power Supply: 2076-92F

    7. With the help of multiple persons or a mechanical lift, lift and remove the enclosure from the rack. Replace the enclosure in the rack 8. To reinstall or return the expansion enclosure in the rack, follow the procedure in “Installing or replacing an expansion enclosure in a rack: 2076-92F” on page Removing a power supply: 2076-92F You can remove either of the redundant power supply units in a 2076-92F expansion enclosure.

  • Page 125: Releasing The Power Supply Handles

    Figure 88. Releasing the power supply handles 5. Carefully pull the PSU out of the expansion enclosure chassis and place it in a safe location, as shown in Figure 89 on page 102. Chapter 2. Installing the Storwize V7000 Gen2 and Storwize V7000 Gen2+ hardware...

  • Page 126: Removing A Drive: 2076-92F

    Figure 89. Removed power supply 6. If you are instructed to return the power supply, follow all packaging instructions. Use any packaging materials for shipping that are supplied to you. Replace the power supply 7. To reinstall the PSU, or replace it with one from FRU stock, follow the procedure in “Installing or replacing a power supply: 2076-92F”...

  • Page 127: Drive Assembly

    Important: You can remove a drive assembly without powering off the expansion enclosure. However, to maintain operating temperature, perform the following tasks. v Do not remove a faulty drive assembly until its replacement is ready to be installed. v Do not keep the cover off an operational enclosure for more than 15 minutes. The reduction in airflow through the enclosure might cause the enclosure or its components to shut down to protect from overheating.

  • Page 128: Drive Locations In A 2076-92F Expansion

    The drive locations are also marked on the enclosure itself. The rows (A-G) are marked on the left and right edges of the enclosure. The columns (1-14) are marked on the front edge of the enclosure. The row and column marks are visible when the top cover is removed.

  • Page 129: Removing A Secondary Expander Module: 2076-92F

    Figure 92. Remove the drive assembly 6. Lift the handle ( 2 ) to unlock the drive carrier from the partition, as shown in Figure 92. Ensure the toe on the bottom of the latch is fully disengaged. 7. Carefully lift the drive carrier up to remove it from the expansion enclosure. 8.
  • Page 130 Use caution when you are removing or replacing a secondary expander module from an enclosure (01LJ112) that is powered on. Avoid contact with the connectors on the main board. Only an IBM Service Support Representative (SSR) can remove the secondary expander module if the 01LJ112 enclosure is powered.

  • Page 131: Location Of Secondary Expander Modules

    The two secondary expansion modules are already installed when the 2076-92F expansion enclosure is shipped, as Figure 93 shows. Figure 93. Location of secondary expander modules Figure 94 shows the location of the LED indicators on the top of the secondary expander module.

  • Page 132: Remove The Secondary Expander Module

    Table 13. LEDs on the secondary expander modules (continued) Color Status Description Fault 2 Amber Not used. Blink The secondary expander module is being identified. Normal operation. This task assumes that the following conditions were met: v The expansion enclosure is slid out from the rack, as described in “Removing an expansion enclosure from a rack: 2076-92F”...

  • Page 133: Removing An Expansion Canister: 2076-92F

    Figure 96. Secondary expander module connectors 5. Place the secondary expander module in a safe location, as shown in Figure 97. Figure 97. Secondary expander module removed from the enclosure 6. If needed, repeat step 2 on page 108 through step 5 to remove the other secondary expander module.
  • Page 134 Before you begin Important: You can remove an expansion canister without powering off the expansion enclosure. However, to maintain operating temperature, perform the following tasks. v Do not remove a faulty expansion canister until its replacement is ready to be installed.

  • Page 135: Removing A Fan Module: 2076-92F

    Figure 99. Removing the expansion canister 6. Carefully pull the expansion canister out of the chassis and place it on a safe, level surface. Replace the expansion canister 7. To reinstall an expansion canister, or replace it with one from FRU stock, follow the procedure in “Installing or replacing an expansion canister: 2076-92F”...

  • Page 136: Fan Module Led

    Figure 100. Fan module LED You can also issue the lsenclosurefanmodule command to display the status of the fan modules. 2. Press the release tab on the fan module, as Figure 101 shows. Figure 101. Fan module release tab 3. Use the handle to pull the fan module out of the expansion enclosure chassis, as shown in Figure 102 on page 113.

  • Page 137: Removing A Fan Interface Board: 2076-92F

    Figure 102. Remove fan module 4. Repeat steps 2 on page 112 and 3 on page 112 for each additional fan module you need to remove. Replace a fan module 5. To reinstall a fan module, or replace it with one from FRU stock, follow the procedure in “Installing or replacing a fan module: 2076-92F”...

  • Page 138: Fan Module Led

    Figure 103. Fan module LED Procedure 1. Using a cross head screwdriver, remove the narrow metal cover that is over the FIBs, as shown in Figure 104. The screws are on each side of the chassis. Place the cover and cover screws in a safe location. Figure 104.

  • Page 139: Loosen The Fib Screws

    Figure 105. Loosen the FIB screws 3. Use the handle to pull the FIB out of the expansion enclosure chassis, as shown in Figure 106. Figure 106. Remove the FIB from the chassis Chapter 2. Installing the Storwize V7000 Gen2 and Storwize V7000 Gen2+ hardware...

  • Page 140: Replacing An Enclosure: 2076-92F

    4. Place the FIB (shown in Figure 107) in a safe location. Figure 107. FIB parts removed from the chassis 5. If needed, repeat steps 2 on page 114 through 3 on page 115 to remove the other FIB. Replace the fan interface board 6.
  • Page 141 To avoid personal injury, before lifting this unit, remove all appropriate subassemblies per instructions to reduce the system weight. (C012) Note: Perform the following procedure only if directed to do so by IBM Remote Technical support or by a fix procedure in the management GUI.

  • Page 142: Removing The Display Panel Assembly: 2076-92F

    a. Install the front display (4U) and PSU (1U) fascia on the new enclosure, as described in “Installing or replacing the fascia: 2076-92F” on page 77. 2. Remove the display panel assembly from the old enclosure, as described in “Removing the display panel assembly: 2076-92F.” a.

  • Page 143: Removing The Display Panel Assembly

    Figure 108. Removing the display panel assembly 4. Carefully pull the display panel assembly, shown in Figure 109 on page 120, out of the chassis. Chapter 2. Installing the Storwize V7000 Gen2 and Storwize V7000 Gen2+ hardware...

  • Page 144: Installing Or Replacing The Display Panel Assembly: 2076-92F

    Figure 109. Display panel assembly Replace the display panel assembly 5. To reinstall the display panel assembly, or replace it with one from FRU stock, follow the procedure in “Installing or replacing the display panel assembly: 2076-92F.” Installing or replacing the display panel assembly: 2076-92F You can replace the display panel assembly in a 2076-92F expansion enclosure.
  • Page 145 About this task This task assumes that the following conditions were met: v The expansion enclosure was moved out from the rack on the slide rails, as described in “Removing an expansion enclosure from a rack: 2076-92F” on page v The top cover was removed, as described in “Removing the top cover: 2076-92F” on page 44.

  • Page 146: Display Panel Assembly

    Figure 110. Display panel assembly 2. Carefully align the display panel assembly in the slot at the front of the expansion enclosure, as shown in Figure 111 on page 123. Ensure the display panel assembly, which is shown in Figure 110, faces toward the outside of the chassis.

  • Page 147: Removing The Support Rails: 2076-92F

    Figure 111. Installing the display panel assembly 3. Insert the display panel assembly until it clicks into position. 4. Replace the top cover, as described in “Installing or replacing the top cover: 2076-92F” on page 68. 5. Ensure the LEDs on the display panel are lit correctly. See “Storwize V7000 2076-92F expansion enclosure LEDs and indicators”...

  • Page 148: Connecting The Optional 2076-92F Sas Expansion Enclosures

    Figure 113. Remove the rail assembly from the rear frame bracket 4. Pull the rail forward, away from the rear bracket, as shown in Figure 113. 5. Repeat step 1 on page 123 through step 4 for the other side of the rail assembly. Replace the support rails 6.
  • Page 149 v No cable can be connected between a port on a left canister and a port on a right canister of the expansion enclosures. v Ensure that cables are installed in an orderly way to reduce the risk of cable damage when replaceable units are removed or inserted.

  • Page 150: Connecting The Sas Cables

    Figure 115. Connecting the SAS cables 2. If more I/O groups are configured, repeat the cabling procedure for the other I/O groups. Each system can have a maximum of four I/O groups, with two chains of expansion enclosures attached to each I/O group. Two chains of expansion enclosures can be attached to each I/O group.

  • Page 151: Powering On The Expansion Enclosure: 2076-92F

    Example Table 14 shows example of different combinations of SAS weights. Table 14. Examples of supported SAS chain combinations Combined chain 2145-12F Enclosures 2145-24F Enclosures 2076-92F Enclosures weight 4.5 (as shown in Figure 115 on page 126) In addition, the orientation of the Input and Output SAS ports on the 2U and 5U SAS enclosures differs.

  • Page 152: Features On The Front Of The 2076-92F

    v To support the 2076-92F expansion enclosure, a Storwize V7000 Gen2 or Storwize V7000 Gen2+ system requires software version 7.8.0. If software version 7.8.0 is not installed on the system, do not connect or power on the expansion enclosure. v Before you connect the power cables to the rear of the enclosure, always check that the expansion enclosure is secured in the rack.

  • Page 153: Power Cable Connections On The Back Of The

    2. Secure the power cables in the cable retainer at each power connector on the rear of the enclosure. Also, ensure that each cable is installed along one of the cable management arms. The cable management arms also support the SAS cables.

  • Page 154: Powering Off The Expansion Enclosure: 2076-92F

    Figure 119. Features on the rear of the 2076-92F expansion enclosure 1 Power cable connector for PSU 2 2 Power cable retention clamps 3 Fan module 4 Fan release latch 5 Fan fault indicator 6 Expansion canister 7 SAS ports and indicators 8 Expansion canister indicators 9 Power cable connector for PSU 1 On the front of the enclosure, the indicators on the front display panel and each...

  • Page 155: Storwize V7000 2076-92F Expansion Enclosure Leds And Indicators

    Before you begin When you power off an expansion enclosure, the drives in that enclosure are no longer available to the control enclosure. The SAS chain also breaks. Any expansion enclosures that are beyond the enclosure that is powered down are also disconnected from the control enclosure.

  • Page 156: Leds On The Front Of The Expansion Enclosure

    Figure 120. LEDs on the front of the expansion enclosure 1 Display panel LEDs 2 Rack retention thumb screws 3 Power supply unit LEDs 4 Power supply units (PSUs) 5 PSU fascia (1U) 6 Front fascia (4U) The display panel ( 1 ) contains three LEDs that describe the operational status of the expansion enclosure.

  • Page 157: Leds On The Front Of A Power Supply Unit

    Table 15. Display panel LEDs (continued) Function Color Status Description Enclosure fault Amber The expansion enclosure is coming up or a fault is detected against a component within the enclosure. No faults are detected. The 2076-92F expansion enclosure contains two PSUs ( 4 in Figure 120 on page 132) that are accessible from the front of the enclosure.

  • Page 158: Leds On A Drive Assembly

    Figure 122 shows the components of a drive assembly. Each drive has an online indicator ( 2 ) and fault indicator ( 3 ). Figure 122. LEDs on a drive assembly Table 17 describes the meaning of the LEDs on each drive. Table 17.

  • Page 159: Leds On A Secondary Expansion Module

    Figure 123. LEDs on a secondary expansion module 1 Online indicator 2 Fault indicator Table 18 describes the meaning of the LEDs on each secondary expansion module. Table 18. LED indicators on secondary expansion modules Function Color Status Description 1 Power Green The secondary expansion module is...

  • Page 160: Leds On The Back Of The Expansion Enclosure

    Figure 124. LEDs on the back of the expansion enclosure The expansion enclosure has four fans. Each fan has one LED; for example, Figure 124 shows the location of the LED ( 5 ) for fan number four. When a fan is operating normally, the LED is not lit.

  • Page 161: Connecting Ethernet Cables To Node Canisters

    Table 19. Expansion canister and SAS port LEDs Name Color State Meaning 1 Canister fault Amber Normal operation. A fault was detected. Flashing The expansion canister is being identified. A fault might or might not be detected. 2 Canister status Green Canister is off.

  • Page 162: Connecting Fibre Channel Cables To A 10 Gbps Iscsi-Fcoe 4-Port Host Interface Adapter

    Figure 126. This port can also be used for iSCSI connectivity to the system by hosts on the network. Where more than one control enclosure is present in the system, ensure port 1 of every node canister is connected to the same network to provide access if the configuration node fails.

  • Page 163: Connecting Fibre Channel Cables To A Fibre Channel Host Interface Adapter

    To install the cables, complete the following steps. 1. Connect the required number of Fibre Channel cables. Refer to the “Planning” section of the IBM Knowledge Center for instructions on determining the number of cables required. Note: Both canisters must have the same number of cables connected.

  • Page 164: Powering On The System

    Figure 129. Example configuration with four Fibre Channel cables per canister 3. If a control enclosure is already installed, you can optionally add Fibre Channel connections between all the control enclosures. v This involves both the physical installation of the cables and configuring the correct zoning on the Fibre Channel switches.

  • Page 165: Expansion Canister

    Figure 130. Expansion canister LEDs 1 Power 2 Status 3 Fault The canister is ready with no critical errors when Power is illuminated, Status is on, and Fault is off. If a canister is not ready, refer to the “Procedure: Understanding the system status using the LEDs”...
  • Page 166 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide...

  • Page 167: Chapter 3. Configuring The System

    Microsoft Internet Explorer (IE) 11 and Microsoft Edge v Google Chrome 54 IBM supports higher versions of the browsers if the vendors do not remove or disable function that the product relies upon. For browser levels higher than the versions that are certified with the product, customer support accepts usage-related and defect-related service requests.
  • Page 168 IBM might investigate potential solutions or work-arounds that the client can implement until a permanent solution becomes available. Procedure To configure your web browser, follow these steps: 1. Enable JavaScript for your web browser. For Mozilla Firefox, JavaScript is enabled by default and requires no additional configuration.
  • Page 169 b. On the Options window, select Privacy. c. Set "Firefox will" to Use custom settings for history. d. Select Accept cookies from sites to enable cookies. e. Click OK. f. Refresh the browser. For Microsoft Internet Explorer: a. In Internet Explorer, click Tools > Internet Options. b.

  • Page 170: User Name And Password For System Initialization

    e. Check the Use TLS 1.1 and Use TLS 1.2 checkboxes. Note: IE 11 and later and Microsoft Edge enable TLS 1.1/1.2 by default. User name and password for system initialization During the initialization procedure, you need to log in to the initialization GUI for the system.

  • Page 171: Adding An Expansion Enclosure To An Existing System

    Refer to “Problem: Cannot initialize or create a Storwize V7000 system” in the Troubleshooting > Resolving a problem section of the Storwize V7000 IBM Knowledge Center. 6. Follow the instructions that are presented by the initialization tool to configure the system with a name and management IP address.

  • Page 172: Adding A Control Enclosure To An Existing System

    2. Install the new enclosure in the rack. 3. Connect the expansion enclosure attachment cables. 4. Connect the power cables and wait for the SAS light-emitting diodes (LEDs) to illuminate. 5. Start the management GUI. 6. Go to Monitoring > System. 7.

  • Page 173: Appendix A. Accessibility Features For Storwize V7000

    See your browser or screen-reader software Help for a list of shortcut keys that it supports. IBM and accessibility See the IBM Human Ability and Accessibility Center for more information about the commitment that IBM has to accessibility. © Copyright IBM Corp. 2014, 2017...
  • Page 174 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide...

  • Page 175: Appendix B. Where To Find The Statement Of Limited Warranty

    Storwize V7000 IBM Knowledge Center. The Statement of Limited Warranty is included (in hardcopy form) with your product. It can also be ordered from IBM (see Table 2 on page xx for the part number). © Copyright IBM Corp. 2014, 2017...
  • Page 176 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide...

  • Page 177: Notices

    Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead.
  • Page 178 The materials at those websites are not part of the materials for this IBM product and use of those websites is at your own risk. IBM may use or distribute any of the information you provide in any way it believes appropriate without incurring any obligation to you.

  • Page 179: Trademarks

    IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. The sample programs are provided "AS IS", without warranty of any kind. IBM shall not be liable for any damages arising out of your use of the sample programs.

  • Page 180: Industry Canada Compliance Statement

    Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors, or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.

  • Page 181: People's Republic Of China Class A Statement

    Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung der IBM verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne Empfehlung der IBM gesteckt/eingebaut werden. EN 55022 Klasse A Geräte müssen mit folgendem Warnhinweis versehen werden: “Warnung: Dieses ist eine Einrichtung der Klasse A.

  • Page 182: Taiwan Class A Compliance Statement

    Taiwan Class A compliance statement Taiwan Contact Information This topic contains the product service contact information for Taiwan. IBM Taiwan Product Service Contact Information: IBM Taiwan Corporation 3F, No 7, Song Ren Rd., Taipei Taiwan Tel: 0800-016-888 Japan Voluntary Control Council for Interference Class A...

  • Page 183: Korean Electromagnetic Interference (Emi) Statement

    This statement explains the JEITA statement for products greater than 20 A, single phase. This statement explains the JEITA statement for products greater than 20 A per phase, three-phase. Korean Electromagnetic Interference (EMI) Statement This explains the Korean Electromagnetic Interference (EMI) statement. Russia Electromagnetic Interference Class A Statement This statement explains the Russia Electromagnetic Interference (EMI) statement.
  • Page 184 Storwize V7000 Gen2 and Gen2+: Quick Installation Guide...

  • Page 185: Index

    New Zealand electronic emission disk drives statement 156 large form factor 5 Germany electronic emission compliance node canister small form factor 5 statement 156 Ethernet cables 137 Fibre Channel cables 138, 139 LEDs 141 © Copyright IBM Corp. 2014, 2017...
  • Page 186 notices ix top covers environmental ix, xviii replacing safety ix 2076-92F 68 trademarks 155 packing slip 5 password 146 user name 146 People's Republic of China, electronic emission statement 157 power cords 140, 141 powering on the system 140 web browsers publications configuring 143 accessing 149...
  • Page 188 IBM® Printed in USA GC27-6500-08...

This manual is also suitable for:

Storvize v7000 gen2+

Table of Contents