Display Mpls Ldp Interface - H3C S5820X Series Command Reference Manual

OutIfCount
OutGoing Info
Table 19 Command output
Field
Label Advertisement Policy
FEC IP-prefix
Peer IP-prefix
Stale
Label Space ID
Label Type
State
Path Vector Count
OutIfCount
Interface

display mpls ldp interface

Use display mpls ldp interface to display the LDP related information for one or more LDP-enabled
interfaces.
Syntax
display mpls ldp interface [ all [ verbose ] | [ vpn-instance vpn-instance-name ] [ interface-type
interface-number | verbose ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Displays all information.
verbose: Displays detailed information.
: 2
: Interface
Vlan200
Vlan100
Description
Information about the label advertisement control policy.
IP prefix list for checking FEC destination addresses.
IP prefix list for checking LSR IDs of LDP peers.
Whether the device is in GR process.
0 indicates that the entire LSR uses one label space.
Label type, Generic, ATM, and FR. The device supports Generic only.
Current state:
•
Established—Active state.
•
IDLE—Inactive state.
•
Release_Awaited—Waiting to a Release message.
•
Established (Sending Mapping)—Sending the mapping message.
•
Established (Delay to withdraw)—Delay to withdraw the incoming label.
•
IDLE (Sending Release)—Sending the release message.
•
Release_Awaited (Sending Withdraw)—Sending the withdraw message.
•
Release_Awaited (Aging)—Aging the label.
Number of LSRs included in the path vector.
Number of outbound interfaces.
Outbound interface.
Nexthop
21.21.21.2
12.12.12.2
55