H3C S5820X Series Command Reference Manual page 24

Mpls command reference
Hide thumbs Also See for S5820X Series:
Table of Contents

Advertisement

Maximum allowed prefix number: 150000
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
ORF advertise capability based on Prefix(type 64):
Local: both
Negotiated: send
Peer Preferred Value: 99
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 5 Command output
Field
Peer
Local
Type
BGP version
remote router ID
BGP current state
Up for
BGP current event
BGP last state
Port
Configured
Received
Negotiated
Peer optional capabilities
Peer support bgp multi-protocol
extended
Peer support bgp route refresh
capability
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Description
IP address of the peer.
IP address of the local router.
BGP type.
Version of BGP that the peer runs.
Router ID of the remote router.
Current status of the BGP session.
Duration since the peer is established.
Current event of the BGP session.
State that the BGP session was in before transitioning to the current
status.
Local and remote ports of the BGP session.
Settings of the local timers, including the active hold interval and
keepalive interval.
Received active hold interval.
Negotiated active hold interval and keepalive time.
Optional capabilities of the peer.
The peer supports multiprotocol extension.
The peer supports route refresh capability.
IPv4 unicast family capability.
Total number of received messages and the number of received
update messages.
Total number of sent messages and the number of sent update
messages.
Maximum number of routes that the VPN instance supports.
Threshold value.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5800 series

Table of Contents