Display Ospf Mpls-Te - H3C S5820X Series Command Reference Manual

Field
Car Policy
Tunnel Group
Primary Tunnel
Backup Tunnel
Group Status

display ospf mpls-te

Use display ospf mpls-te to display TE LSAs in the link state database (LSDB).
Syntax
display ospf [ process-id ] mpls-te [ area area-id ] [ self-originated ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process ID in the range of 1 to 65535. If a process is specified, only the
TE LSAs of this process are displayed. If no process is specified, the TE LSAs of all processes are
displayed.
area area-id: Displays the TE LSAs of a specific OSPF area. The area-id argument takes an integer in the
range of 0 to 4294967295 or the form of IPv4 address.
self-originated: Displays self originated TE LSAs.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all TE LSAs in the LSDB.
<Sysname> display ospf mpls-te
OSPF Process 100 with Router ID 10.0.0.1
Area ID:
Traffic Engineering LSA's of the database
------------------------------------------------
LSA []
Description
Whether CAR policy is enabled.
Whether the tunnel is the primary tunnel or backup tunnel in the group.
Tunnel ID of the corresponding primary tunnel. Displayed as - for a
primary tunnel.
Tunnel ID of the corresponding backup tunnel. Displayed as - for a
backup tunnel.
Status of the group. Displayed as - if no protection group is configured.
151