Display Mpls Nhlfe - H3C S5820X Series Command Reference Manual

Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display LSP statistics.
<Sysname> display mpls lsp statistics
Lsp Type
STATIC LSP
STATIC CRLSP
LDP LSP
CRLDP CRLSP
RSVP CRLSP
BGP LSP
ASBR LSP
BGP IPV6 LSP
-------------------------------------------------------------------------
LSP
CRLSP
Table 30 Command output
Field
Ingress
Transit
Egress

display mpls nhlfe

Use display mpls nhlfe to display information about NHLFE entries.
Syntax
display mpls nhlfe [ token ] [ verbose ] [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
token: Specifies an NHLFE entry index.
Total Ingress
0 0
0 0
8 2
0 0
0 0
0 0
0 0
0 0
8 2
0 0
Description
Number of LSPs taking the current LSR as ingress.
Number of LSPs taking the current LSR as transit LSR.
Number of LSPs taking the current LSR as egress.
Transit Egress
0 0
0 0
2 4
0 0
0 0
0 0
0 0
0 0
2 4
0 0
70