Filter-Policy Import; Import Route-Policy - H3C S5820X Series Command Reference Manual

[Sysname-bgp-vpn1] filter-policy 2555 export

filter-policy import

Use filter-policy import to filter received routes.
Use undo filter-policy import to remove the configuration.
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } import
undo filter-policy import
Default
BGP does not filter received routes.
Views
BGP-VPN instance view
Default command level
2: System level
Parameters
acl-number: Specifies an IP ACL number in the range of 2000 to 3999.
ip-prefix-name: Specifies an IP address prefix list name, a string of 1 to 19 characters.
Usage guidelines
Only routes that survive the filtering are added into the BGP routing table.
Examples
# Configure BGP to filter received routes using ACL 2255.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] filter-policy 2255 import

import route-policy

Use import route-policy to apply a routing policy to filter incoming routes for the VPN instance. Such a
routing policy is referred to as an import routing policy.
Use undo import route-policy to remove the application.
Syntax
import route-policy route-policy
undo import route-policy
Default
All routes permitted by the import target attribute are accepted.
Views
VPN instance view, IPv4 VPN view
18