Display Mpls Ilm - H3C S5820X Series Command Reference Manual

The BFD session parameters are those configured on the loopback interface whose IP address is
configured as the MPLS LSR ID. The BFD packets use the MPLS LSR ID as the source address. Before
enabling BFD for an LSP, configure an IP address for the loopback interface and configure the MPLS LSR
ID as the IP address of the loopback interface. You can also configure BFD session parameters for the
loopback interface as needed.
Examples
# Enable BFD to detect the LSP connectivity to destination 1.1.1.9/32.
<Sysname> system-view
[Sysname] mpls lspv
[Sysname-mpls-lspv] bfd enable 1.1.1.9 32

display mpls ilm

Use display mpls ilm to display information about ILM entries.
Syntax
display mpls ilm [ label ] [ verbose ] [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
label: Specifies an incoming label in the range of 16 to 4294967295.
verbose: Displays the detailed information.
slot slot-number: Displays the ILM entries on an IRF member switch. The slot-number argument specifies
the ID of an IRF member switch. The value range for the argument depends on the number of member
switches and their member IDs in the IRF fabric.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
With no incoming label specified, the command displays information about all ILM entries.
Examples
# Display the ILM entry with a specific incoming label.
<Sysname> display mpls ilm 60
Inlabel In-Interface
-----------------------------------------------------------------------------
60 GE1/0/1
Token VRF-Index
1 0
47
Oper LSP-Type
NULL STATIC LSP
Swap-Label
-