Ipv4-Family; Ipv4-Family Vpn-Instance - H3C S5820X Series Command Reference Manual

ipv4-family

Use ipv4-family to enter IPv4 VPN view.
Use undo ipv4-family to remove all configurations performed in IPv4 VPN view.
Syntax
ipv4-family
undo ipv4-family
Views
VPN instance view
Default command level
2: System level
Examples
# Enter IPv4 VPN view.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] ipv4-family
[Sysname-vpn-ipv4-vpn1]

ipv4-family vpn-instance

Use ipv4-family vpn-instance to enter BGP-VPN instance view.
Use undo ipv4-family vpn-instance to remove all the configurations performed in the view.
Syntax
ipv4-family vpn-instance vpn-instance-name
undo ipv4-family vpn-instance vpn-instance-name
Views
BGP view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Associates a VPN instance with an IPv4 address family and enters BGP
VPN instance view. The vpn-instance-name argument specifies the VPN instance name, a case-sensitive
string of 1 to 31 characters.
Usage guidelines
Before entering BGP VPN instance view, make sure the corresponding VPN instance is created.
Examples
# Enter BGP-VPN instance view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname] ipv4-family vpn-instance vpn1
21